AWSSDK.SimpleEmail

Configuration for accessing Amazon SimpleEmailService service

Default constructor

The constant used to lookup in the region hash the endpoint.

Gets the ServiceVersion property.

Gets the value of UserAgent property.

Common exception for the SimpleEmailService service.

Construct instance of AmazonSimpleEmailServiceException

Constructs a new instance of the AmazonSimpleEmailServiceException class with serialized data.

The that holds the serialized object data about the exception being thrown. The that contains contextual information about the source or destination. The parameter is null. The class name is null or is zero (0).

Service metadata for Amazon SimpleEmailService service

Gets the value of the Service Id.

Gets the dictionary that gives mapping of renamed operations

SimpleEmailService exception

Constructs a new AccountSendingPausedException with the specified error message.

Describes the error encountered.

Construct instance of AccountSendingPausedException

Constructs a new instance of the AccountSendingPausedException class with serialized data.

When included in a receipt rule, this action adds a header to the received email. For information about adding a header using a receipt rule, see the Amazon SES Developer Guide.

Gets and sets the property HeaderName. The name of the header to add. Must be between 1 and 50 characters, inclusive, and consist of alphanumeric (a-z, A-Z, 0-9) characters and dashes only.

Gets and sets the property HeaderValue. Must be less than 2048 characters, and must not contain newline characters ("\r" or "\n").

SimpleEmailService exception

Constructs a new AlreadyExistsException with the specified error message.

Describes the error encountered.

Construct instance of AlreadyExistsException

Constructs a new instance of the AlreadyExistsException class with serialized data.

Represents the body of the message. You can specify text, HTML, or both. If you use both, then the message should display correctly in the widest variety of email clients.

Empty constructor used to set properties independently even when a simple constructor is available

Instantiates Body with the parameterized properties

The content of the message, in text format. Use this for text-based email clients, or clients on high-latency networks (such as mobile devices).

Gets and sets the property Html. The content of the message, in HTML format. Use this for email clients that can process HTML. You can include clickable links, formatted text, and much more in an HTML message.

Gets and sets the property Text. The content of the message, in text format. Use this for text-based email clients, or clients on high-latency networks (such as mobile devices).

When included in a receipt rule, this action rejects the received email by returning a bounce response to the sender and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS). For information about sending a bounce message in response to a received email, see the Amazon SES Developer Guide.

Gets and sets the property Message. Human-readable text to include in the bounce message.

Gets and sets the property Sender. The email address of the sender of the bounced email. This is the address from which the bounce message will be sent.

Gets and sets the property SmtpReplyCode. The SMTP reply code, as defined by RFC 5321.

Gets and sets the property StatusCode. The SMTP enhanced status code, as defined by RFC 3463.

Gets and sets the property TopicArn. The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the bounce action is taken. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.

Recipient-related information to include in the Delivery Status Notification (DSN) when an email that Amazon SES receives on your behalf bounces. For information about receiving email through Amazon SES, see the Amazon SES Developer Guide.

Gets and sets the property BounceType. The reason for the bounce. You must provide either this parameter or RecipientDsnFields.

Gets and sets the property Recipient. The email address of the recipient of the bounced email.

Gets and sets the property RecipientArn. This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to receive email for the recipient of the bounced email. For more information about sending authorization, see the Amazon SES Developer Guide.

Gets and sets the property RecipientDsnFields. Recipient-related DSN fields, most of which would normally be filled in automatically when provided with a BounceType. You must provide either this parameter or BounceType.

An array that contains one or more Destinations, as well as the tags and replacement data associated with each of those Destinations.

Gets and sets the property Destination.

Gets and sets the property ReplacementTags. A list of tags, in the form of name/value pairs, to apply to an email that you send using SendBulkTemplatedEmail. Tags correspond to characteristics of the email that you define, so that you can publish email sending events.

Gets and sets the property ReplacementTemplateData. A list of replacement values to apply to the template. This parameter is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.

An object that contains the response from the SendBulkTemplatedEmail operation.

Gets and sets the property Error. A description of an error that prevented a message being sent using the SendBulkTemplatedEmail operation.

Gets and sets the property MessageId. The unique message identifier returned from the SendBulkTemplatedEmail operation.

Gets and sets the property Status. The status of a message sent using the SendBulkTemplatedEmail operation. Possible values for this parameter include:

Success: Amazon SES accepted the message, and will attempt to deliver it to the recipients.
MessageRejected: The message was rejected because it contained a virus.
MailFromDomainNotVerified: The sender's email address or domain was not verified.
ConfigurationSetDoesNotExist: The configuration set you specified does not exist.
TemplateDoesNotExist: The template you specified does not exist.
AccountSuspended: Your account has been shut down because of issues related to your email sending practices.
AccountThrottled: The number of emails you can send has been reduced because your account has exceeded its allocated sending limit.
AccountDailyQuotaExceeded: You have reached or exceeded the maximum number of emails you can send from your account in a 24-hour period.
InvalidSendingPoolName: The configuration set you specified refers to an IP pool that does not exist.
AccountSendingPaused: Email sending for the Amazon SES account was disabled using the UpdateAccountSendingEnabled operation.
ConfigurationSetSendingPaused: Email sending for this configuration set was disabled using the UpdateConfigurationSetSendingEnabled operation.
InvalidParameterValue: One or more of the parameters you specified when calling this operation was invalid. See the error message for additional information.
TransientFailure: Amazon SES was unable to process your request because of a temporary issue.
Failed: Amazon SES was unable to process your request. See the error message for additional information.

SimpleEmailService exception

Constructs a new CannotDeleteException with the specified error message.

Describes the error encountered.

Construct instance of CannotDeleteException

Constructs a new instance of the CannotDeleteException class with serialized data.

Container for the parameters to the CloneReceiptRuleSet operation. Creates a receipt rule set by cloning an existing one. All receipt rules and configurations are copied to the new receipt rule set and are completely independent of the source rule set. For information about setting up rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property OriginalRuleSetName. The name of the rule set to clone.

Gets and sets the property RuleSetName. The name of the rule set to create. The name must:

This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).
Start and end with a letter or number.
Contain less than 64 characters.

An empty element returned on a successful request.

Contains information associated with an Amazon CloudWatch event destination to which email sending events are published. Event destinations, such as Amazon CloudWatch, are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Gets and sets the property DimensionConfigurations. A list of dimensions upon which to categorize your emails when you publish email sending events to Amazon CloudWatch.

Contains the dimension configuration to use when you publish email sending events to Amazon CloudWatch. For information about publishing email sending events to Amazon CloudWatch, see the Amazon SES Developer Guide.

Gets and sets the property DefaultDimensionValue. The default value of the dimension that is published to Amazon CloudWatch if you do not provide the value of the dimension when you send an email. The default value must:

This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).
Contain less than 256 characters.

Gets and sets the property DimensionName. The name of an Amazon CloudWatch dimension associated with an email sending metric. The name must:

This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).
Contain less than 256 characters.

Gets and sets the property DimensionValueSource. The place where Amazon SES finds the value of a dimension to publish to Amazon CloudWatch. If you want Amazon SES to use the message tags that you specify using an X-SES-MESSAGE-TAGS header or a parameter to the SendEmail/SendRawEmail API, choose messageTag. If you want Amazon SES to use your own email headers, choose emailHeader.

The name of the configuration set. Configuration sets let you create groups of rules that you can apply to the emails you send using Amazon SES. For more information about using configuration sets, see Using Amazon SES Configuration Sets in the Amazon SES Developer Guide.

Gets and sets the property Name. The name of the configuration set. The name must meet the following requirements:

Contain only letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).
Contain 64 characters or fewer.

SimpleEmailService exception

Constructs a new ConfigurationSetAlreadyExistsException with the specified error message.

Describes the error encountered.

Construct instance of ConfigurationSetAlreadyExistsException

Constructs a new instance of the ConfigurationSetAlreadyExistsException class with serialized data.

SimpleEmailService exception

Constructs a new ConfigurationSetDoesNotExistException with the specified error message.

Describes the error encountered.

Construct instance of ConfigurationSetDoesNotExistException

Constructs a new instance of the ConfigurationSetDoesNotExistException class with serialized data.

SimpleEmailService exception

Constructs a new ConfigurationSetSendingPausedException with the specified error message.

Describes the error encountered.

Construct instance of ConfigurationSetSendingPausedException

Constructs a new instance of the ConfigurationSetSendingPausedException class with serialized data.

Represents textual data, plus an optional character set specification. By default, the text must be 7-bit ASCII, due to the constraints of the SMTP protocol. If the text must contain any other characters, then you must also specify a character set. Examples include UTF-8, ISO-8859-1, and Shift_JIS.

Empty constructor used to set properties independently even when a simple constructor is available

Instantiates Content with the parameterized properties

The textual data of the content.

Gets and sets the property Charset. The character set of the content.

Gets and sets the property Data. The textual data of the content.

Container for the parameters to the CreateConfigurationSetEventDestination operation. Creates a configuration set event destination. When you create or update an event destination, you must provide one, and only one, destination. The destination can be CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS). An event destination is the AWS service to which Amazon SES publishes the email sending events associated with a configuration set. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property ConfigurationSetName. The name of the configuration set that the event destination should be associated with.

Gets and sets the property EventDestination. An object that describes the AWS service that email sending event information will be published to.

An empty element returned on a successful request.

Container for the parameters to the CreateConfigurationSet operation. Creates a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property ConfigurationSet. A data structure that contains the name of the configuration set.

An empty element returned on a successful request.

Container for the parameters to the CreateConfigurationSetTrackingOptions operation. Creates an association between a configuration set and a custom domain for open and click event tracking. By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using custom domains, see the Amazon SES Developer Guide.

Gets and sets the property ConfigurationSetName. The name of the configuration set that the tracking options should be associated with.

Gets and sets the property TrackingOptions.

An empty element returned on a successful request.

Container for the parameters to the CreateCustomVerificationEmailTemplate operation. Creates a new custom verification email template. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property FailureRedirectionURL. The URL that the recipient of the verification email is sent to if his or her address is not successfully verified.

Gets and sets the property FromEmailAddress. The email address that the custom verification email is sent from.

Gets and sets the property SuccessRedirectionURL. The URL that the recipient of the verification email is sent to if his or her address is successfully verified.

Gets and sets the property TemplateContent. The content of the custom verification email. The total size of the email must be less than 10 MB. The message body may contain HTML, with some limitations. For more information, see Custom Verification Email Frequently Asked Questions in the Amazon SES Developer Guide.

Gets and sets the property TemplateName. The name of the custom verification email template.

Gets and sets the property TemplateSubject. The subject line of the custom verification email.

This is the response object from the CreateCustomVerificationEmailTemplate operation.

Container for the parameters to the CreateReceiptFilter operation. Creates a new IP address filter. For information about setting up IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property Filter. A data structure that describes the IP address filter to create, which consists of a name, an IP address range, and whether to allow or block mail from it.

An empty element returned on a successful request.

Container for the parameters to the CreateReceiptRule operation. Creates a receipt rule. For information about setting up receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property After. The name of an existing rule after which the new rule will be placed. If this parameter is null, the new rule will be inserted at the beginning of the rule list.

Gets and sets the property Rule. A data structure that contains the specified rule's name, actions, recipients, domains, enabled status, scan status, and TLS policy.

Gets and sets the property RuleSetName. The name of the rule set that the receipt rule will be added to.

An empty element returned on a successful request.

Container for the parameters to the CreateReceiptRuleSet operation. Creates an empty receipt rule set. For information about setting up receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property RuleSetName. The name of the rule set to create. The name must:

This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).
Start and end with a letter or number.
Contain less than 64 characters.

An empty element returned on a successful request.

Container for the parameters to the CreateTemplate operation. Creates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property Template. The content of the email, composed of a subject line, an HTML part, and a text-only part.

This is the response object from the CreateTemplate operation.

SimpleEmailService exception

Constructs a new CustomVerificationEmailInvalidContentException with the specified error message.

Describes the error encountered.

Construct instance of CustomVerificationEmailInvalidContentException

Constructs a new instance of the CustomVerificationEmailInvalidContentException class with serialized data.

Contains information about a custom verification email template.

Gets and sets the property FailureRedirectionURL. The URL that the recipient of the verification email is sent to if his or her address is not successfully verified.

Gets and sets the property FromEmailAddress. The email address that the custom verification email is sent from.

Gets and sets the property SuccessRedirectionURL. The URL that the recipient of the verification email is sent to if his or her address is successfully verified.

Gets and sets the property TemplateName. The name of the custom verification email template.

Gets and sets the property TemplateSubject. The subject line of the custom verification email.

SimpleEmailService exception

Constructs a new CustomVerificationEmailTemplateAlreadyExistsException with the specified error message.

Describes the error encountered.

Construct instance of CustomVerificationEmailTemplateAlreadyExistsException

Constructs a new instance of the CustomVerificationEmailTemplateAlreadyExistsException class with serialized data.

SimpleEmailService exception

Constructs a new CustomVerificationEmailTemplateDoesNotExistException with the specified error message.

Describes the error encountered.

Construct instance of CustomVerificationEmailTemplateDoesNotExistException

Constructs a new instance of the CustomVerificationEmailTemplateDoesNotExistException class with serialized data.

Container for the parameters to the DeleteConfigurationSetEventDestination operation. Deletes a configuration set event destination. Configuration set event destinations are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property ConfigurationSetName. The name of the configuration set from which to delete the event destination.

Gets and sets the property EventDestinationName. The name of the event destination to delete.

An empty element returned on a successful request.

Container for the parameters to the DeleteConfigurationSet operation. Deletes a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property ConfigurationSetName. The name of the configuration set to delete.

An empty element returned on a successful request.

Container for the parameters to the DeleteConfigurationSetTrackingOptions operation. Deletes an association between a configuration set and a custom domain for open and click event tracking. By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using custom domains, see the Amazon SES Developer Guide. Deleting this kind of association will result in emails sent using the specified configuration set to capture open and click events using the standard, Amazon SES-operated domains.

Gets and sets the property ConfigurationSetName. The name of the configuration set from which you want to delete the tracking options.

An empty element returned on a successful request.

Container for the parameters to the DeleteCustomVerificationEmailTemplate operation. Deletes an existing custom verification email template. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property TemplateName. The name of the custom verification email template that you want to delete.

This is the response object from the DeleteCustomVerificationEmailTemplate operation.

Container for the parameters to the DeleteIdentityPolicy operation. Deletes the specified sending authorization policy for the given identity (an email address or a domain). This API returns successfully even if a policy with the specified name does not exist. This API is for the identity owner only. If you have not verified the identity, this API will return an error. Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property Identity. The identity that is associated with the policy that you want to delete. You can specify the identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com. To successfully call this API, you must own the identity.

Gets and sets the property PolicyName. The name of the policy to be deleted.

An empty element returned on a successful request.

Container for the parameters to the DeleteIdentity operation. Deletes the specified identity (an email address or a domain) from the list of verified identities. You can execute this operation no more than once per second.

Gets and sets the property Identity. The identity to be removed from the list of identities for the AWS Account.

An empty element returned on a successful request.

Container for the parameters to the DeleteReceiptFilter operation. Deletes the specified IP address filter. For information about managing IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property FilterName. The name of the IP address filter to delete.

An empty element returned on a successful request.

Container for the parameters to the DeleteReceiptRule operation. Deletes the specified receipt rule. For information about managing receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property RuleName. The name of the receipt rule to delete.

Gets and sets the property RuleSetName. The name of the receipt rule set that contains the receipt rule to delete.

An empty element returned on a successful request.

Container for the parameters to the DeleteReceiptRuleSet operation. Deletes the specified receipt rule set and all of the receipt rules it contains. The currently active rule set cannot be deleted. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property RuleSetName. The name of the receipt rule set to delete.

An empty element returned on a successful request.

Container for the parameters to the DeleteTemplate operation. Deletes an email template. You can execute this operation no more than once per second.

Gets and sets the property TemplateName. The name of the template to be deleted.

This is the response object from the DeleteTemplate operation.

Container for the parameters to the DeleteVerifiedEmailAddress operation. Deprecated. Use the DeleteIdentity operation to delete email addresses and domains.

Gets and sets the property EmailAddress. An email address to be removed from the list of verified addresses.

This is the response object from the DeleteVerifiedEmailAddress operation.

Container for the parameters to the DescribeActiveReceiptRuleSet operation. Returns the metadata and receipt rules for the receipt rule set that is currently active. For information about setting up receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Represents the metadata and receipt rules for the receipt rule set that is currently active.

Gets and sets the property Metadata. The metadata for the currently active receipt rule set. The metadata consists of the rule set name and a timestamp of when the rule set was created.

Gets and sets the property Rules. The receipt rules that belong to the active rule set.

Container for the parameters to the DescribeConfigurationSet operation. Returns the details of the specified configuration set. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property ConfigurationSetAttributeNames. A list of configuration set attributes to return.

Gets and sets the property ConfigurationSetName. The name of the configuration set to describe.

Represents the details of a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Gets and sets the property ConfigurationSet. The configuration set object associated with the specified configuration set.

Gets and sets the property EventDestinations. A list of event destinations associated with the configuration set.

Gets and sets the property ReputationOptions. An object that represents the reputation settings for the configuration set.

Gets and sets the property TrackingOptions. The name of the custom open and click tracking domain associated with the configuration set.

Container for the parameters to the DescribeReceiptRule operation. Returns the details of the specified receipt rule. For information about setting up receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property RuleName. The name of the receipt rule.

Gets and sets the property RuleSetName. The name of the receipt rule set that the receipt rule belongs to.

Represents the details of a receipt rule.

Gets and sets the property Rule. A data structure that contains the specified receipt rule's name, actions, recipients, domains, enabled status, scan status, and Transport Layer Security (TLS) policy.

Container for the parameters to the DescribeReceiptRuleSet operation. Returns the details of the specified receipt rule set. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property RuleSetName. The name of the receipt rule set to describe.

Represents the details of the specified receipt rule set.

Gets and sets the property Metadata. The metadata for the receipt rule set, which consists of the rule set name and the timestamp of when the rule set was created.

Gets and sets the property Rules. A list of the receipt rules that belong to the specified receipt rule set.

Represents the destination of the message, consisting of To:, CC:, and BCC: fields. Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the local part of a destination email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492.

Empty constructor used to set properties independently even when a simple constructor is available

Instantiates Destination with the parameterized properties

The To: field(s) of the message.

Gets and sets the property BccAddresses. The BCC: field(s) of the message.

Gets and sets the property CcAddresses. The CC: field(s) of the message.

Gets and sets the property ToAddresses. The To: field(s) of the message.

Contains information about the event destination that the specified email sending events will be published to. When you create or update an event destination, you must provide one, and only one, destination. The destination can be Amazon CloudWatch, Amazon Kinesis Firehose or Amazon Simple Notification Service (Amazon SNS). Event destinations are associated with configuration sets, which enable you to publish email sending events to Amazon CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS). For information about using configuration sets, see the Amazon SES Developer Guide.

Gets and sets the property CloudWatchDestination. An object that contains the names, default values, and sources of the dimensions associated with an Amazon CloudWatch event destination.

Gets and sets the property Enabled. Sets whether Amazon SES publishes events to this destination when you send an email with the associated configuration set. Set to true to enable publishing to this destination; set to false to prevent publishing to this destination. The default value is false.

Gets and sets the property KinesisFirehoseDestination. An object that contains the delivery stream ARN and the IAM role ARN associated with an Amazon Kinesis Firehose event destination.

Gets and sets the property MatchingEventTypes. The type of email sending events to publish to the event destination.

Gets and sets the property Name. The name of the event destination. The name must:

This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).
Contain less than 64 characters.

Gets and sets the property SNSDestination. An object that contains the topic ARN associated with an Amazon Simple Notification Service (Amazon SNS) event destination.

SimpleEmailService exception

Constructs a new EventDestinationAlreadyExistsException with the specified error message.

Describes the error encountered.

Construct instance of EventDestinationAlreadyExistsException

Constructs a new instance of the EventDestinationAlreadyExistsException class with serialized data.

SimpleEmailService exception

Constructs a new EventDestinationDoesNotExistException with the specified error message.

Describes the error encountered.

Construct instance of EventDestinationDoesNotExistException

Constructs a new instance of the EventDestinationDoesNotExistException class with serialized data.

Additional X-headers to include in the Delivery Status Notification (DSN) when an email that Amazon SES receives on your behalf bounces. For information about receiving email through Amazon SES, see the Amazon SES Developer Guide.

Gets and sets the property Name. The name of the header to add. Must be between 1 and 50 characters, inclusive, and consist of alphanumeric (a-z, A-Z, 0-9) characters and dashes only.

Gets and sets the property Value. The value of the header to add. Must be less than 2048 characters, and must not contain newline characters ("\r" or "\n").

SimpleEmailService exception

Constructs a new FromEmailAddressNotVerifiedException with the specified error message.

Describes the error encountered.

Construct instance of FromEmailAddressNotVerifiedException

Constructs a new instance of the FromEmailAddressNotVerifiedException class with serialized data.

Container for the parameters to the GetAccountSendingEnabled operation. Returns the email sending status of the Amazon SES account for the current region. You can execute this operation no more than once per second.

Represents a request to return the email sending status for your Amazon SES account in the current AWS Region.

Gets and sets the property Enabled. Describes whether email sending is enabled or disabled for your Amazon SES account in the current AWS Region.

Container for the parameters to the GetCustomVerificationEmailTemplate operation. Returns the custom email verification template for the template name you specify. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property TemplateName. The name of the custom verification email template that you want to retrieve.

The content of the custom verification email template.

Gets and sets the property FailureRedirectionURL. The URL that the recipient of the verification email is sent to if his or her address is not successfully verified.

Gets and sets the property FromEmailAddress. The email address that the custom verification email is sent from.

Gets and sets the property SuccessRedirectionURL. The URL that the recipient of the verification email is sent to if his or her address is successfully verified.

Gets and sets the property TemplateContent. The content of the custom verification email.

Gets and sets the property TemplateName. The name of the custom verification email template.

Gets and sets the property TemplateSubject. The subject line of the custom verification email.

Container for the parameters to the GetIdentityDkimAttributes operation. Returns the current status of Easy DKIM signing for an entity. For domain name identities, this operation also returns the DKIM tokens that are required for Easy DKIM signing, and whether Amazon SES has successfully verified that these tokens have been published. This operation takes a list of identities as input and returns the following information for each:

Whether Easy DKIM signing is enabled or disabled.
A set of DKIM tokens that represent the identity. If the identity is an email address, the tokens represent the domain of that address.
Whether Amazon SES has successfully verified the DKIM tokens published in the domain's DNS. This information is only returned for domain name identities, not for email addresses.

This operation is throttled at one request per second and can only get DKIM attributes for up to 100 identities at a time. For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.

Gets and sets the property Identities. A list of one or more verified identities - email addresses, domains, or both.

Represents the status of Amazon SES Easy DKIM signing for an identity. For domain identities, this response also contains the DKIM tokens that are required for Easy DKIM signing, and whether Amazon SES successfully verified that these tokens were published.

Gets and sets the property DkimAttributes. The DKIM attributes for an email address or a domain.

Container for the parameters to the GetIdentityMailFromDomainAttributes operation. Returns the custom MAIL FROM attributes for a list of identities (email addresses : domains). This operation is throttled at one request per second and can only get custom MAIL FROM attributes for up to 100 identities at a time.

Gets and sets the property Identities. A list of one or more identities.

Represents the custom MAIL FROM attributes for a list of identities.

Gets and sets the property MailFromDomainAttributes. A map of identities to custom MAIL FROM attributes.

Container for the parameters to the GetIdentityNotificationAttributes operation. Given a list of verified identities (email addresses and/or domains), returns a structure describing identity notification attributes. This operation is throttled at one request per second and can only get notification attributes for up to 100 identities at a time. For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.

Gets and sets the property Identities. A list of one or more identities. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com.

Represents the notification attributes for a list of identities.

Gets and sets the property NotificationAttributes. A map of Identity to IdentityNotificationAttributes.

Container for the parameters to the GetIdentityPolicies operation. Returns the requested sending authorization policies for the given identity (an email address or a domain). The policies are returned as a map of policy names to policy contents. You can retrieve a maximum of 20 policies at a time. This API is for the identity owner only. If you have not verified the identity, this API will return an error. Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property Identity. The identity for which the policies will be retrieved. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com. To successfully call this API, you must own the identity.

Gets and sets the property PolicyNames. A list of the names of policies to be retrieved. You can retrieve a maximum of 20 policies at a time. If you do not know the names of the policies that are attached to the identity, you can use ListIdentityPolicies.

Represents the requested sending authorization policies.

Gets and sets the property Policies. A map of policy names to policies.

Container for the parameters to the GetIdentityVerificationAttributes operation. Given a list of identities (email addresses and/or domains), returns the verification status and (for domain identities) the verification token for each identity. The verification status of an email address is "Pending" until the email address owner clicks the link within the verification email that Amazon SES sent to that address. If the email address owner clicks the link within 24 hours, the verification status of the email address changes to "Success". If the link is not clicked within 24 hours, the verification status changes to "Failed." In that case, if you still want to verify the email address, you must restart the verification process from the beginning. For domain identities, the domain's verification status is "Pending" as Amazon SES searches for the required TXT record in the DNS settings of the domain. When Amazon SES detects the record, the domain's verification status changes to "Success". If Amazon SES is unable to detect the record within 72 hours, the domain's verification status changes to "Failed." In that case, if you still want to verify the domain, you must restart the verification process from the beginning. This operation is throttled at one request per second and can only get verification attributes for up to 100 identities at a time.

Gets and sets the property Identities. A list of identities.

The Amazon SES verification status of a list of identities. For domain identities, this response also contains the verification token.

Gets and sets the property VerificationAttributes. A map of Identities to IdentityVerificationAttributes objects.

Container for the parameters to the GetSendQuota operation. Provides the sending limits for the Amazon SES account. You can execute this operation no more than once per second.

Represents your Amazon SES daily sending quota, maximum send rate, and the number of emails you have sent in the last 24 hours.

Gets and sets the property Max24HourSend. The maximum number of emails the user is allowed to send in a 24-hour interval. A value of -1 signifies an unlimited quota.

Gets and sets the property MaxSendRate. The maximum number of emails that Amazon SES can accept from the user's account per second. The rate at which Amazon SES accepts the user's messages might be less than the maximum send rate.

Gets and sets the property SentLast24Hours. The number of emails sent during the previous 24 hours.

Container for the parameters to the GetSendStatistics operation. Provides sending statistics for the current AWS Region. The result is a list of data points, representing the last two weeks of sending activity. Each data point in the list contains statistics for a 15-minute period of time. You can execute this operation no more than once per second.

Represents a list of data points. This list contains aggregated data from the previous two weeks of your sending activity with Amazon SES.

Gets and sets the property SendDataPoints. A list of data points, each of which represents 15 minutes of activity.

Container for the parameters to the GetTemplate operation. Displays the template object (which includes the Subject line, HTML part and text part) for the template you specify. You can execute this operation no more than once per second.

Gets and sets the property TemplateName. The name of the template you want to retrieve.

This is the response object from the GetTemplate operation.

Gets and sets the property Template.

Represents the DKIM attributes of a verified email address or a domain.

Gets and sets the property DkimEnabled. True if DKIM signing is enabled for email sent from the identity; false otherwise. The default value is true.

Gets and sets the property DkimTokens. A set of character strings that represent the domain's identity. Using these tokens, you will need to create DNS CNAME records that point to DKIM public keys hosted by Amazon SES. Amazon Web Services will eventually detect that you have updated your DNS records; this detection process may take up to 72 hours. Upon successful detection, Amazon SES will be able to DKIM-sign email originating from that domain. (This only applies to domain identities, not email address identities.) For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.

Gets and sets the property DkimVerificationStatus. Describes whether Amazon SES has successfully verified the DKIM DNS records (tokens) published in the domain name's DNS. (This only applies to domain identities, not email address identities.)

Represents the custom MAIL FROM domain attributes of a verified identity (email address or domain).

Gets and sets the property BehaviorOnMXFailure. The action that Amazon SES takes if it cannot successfully read the required MX record when you send an email. A value of UseDefaultValue indicates that if Amazon SES cannot read the required MX record, it uses amazonses.com (or a subdomain of that) as the MAIL FROM domain. A value of RejectMessage indicates that if Amazon SES cannot read the required MX record, Amazon SES returns a MailFromDomainNotVerified error and does not send the email. The custom MAIL FROM setup states that result in this behavior are Pending, Failed, and TemporaryFailure.

Gets and sets the property MailFromDomain. The custom MAIL FROM domain that the identity is configured to use.

Gets and sets the property MailFromDomainStatus. The state that indicates whether Amazon SES has successfully read the MX record required for custom MAIL FROM domain setup. If the state is Success, Amazon SES uses the specified custom MAIL FROM domain when the verified identity sends an email. All other states indicate that Amazon SES takes the action described by BehaviorOnMXFailure.

Represents the notification attributes of an identity, including whether an identity has Amazon Simple Notification Service (Amazon SNS) topics set for bounce, complaint, and/or delivery notifications, and whether feedback forwarding is enabled for bounce and complaint notifications.

Gets and sets the property BounceTopic. The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES will publish bounce notifications.

Gets and sets the property ComplaintTopic. The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES will publish complaint notifications.

Gets and sets the property DeliveryTopic. The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES will publish delivery notifications.

Gets and sets the property ForwardingEnabled. Describes whether Amazon SES will forward bounce and complaint notifications as email. true indicates that Amazon SES will forward bounce and complaint notifications as email, while false indicates that bounce and complaint notifications will be published only to the specified bounce and complaint Amazon SNS topics.

Gets and sets the property HeadersInBounceNotificationsEnabled. Describes whether Amazon SES includes the original email headers in Amazon SNS notifications of type Bounce. A value of true specifies that Amazon SES will include headers in bounce notifications, and a value of false specifies that Amazon SES will not include headers in bounce notifications.

Gets and sets the property HeadersInComplaintNotificationsEnabled. Describes whether Amazon SES includes the original email headers in Amazon SNS notifications of type Complaint. A value of true specifies that Amazon SES will include headers in complaint notifications, and a value of false specifies that Amazon SES will not include headers in complaint notifications.

Gets and sets the property HeadersInDeliveryNotificationsEnabled. Describes whether Amazon SES includes the original email headers in Amazon SNS notifications of type Delivery. A value of true specifies that Amazon SES will include headers in delivery notifications, and a value of false specifies that Amazon SES will not include headers in delivery notifications.

Represents the verification attributes of a single identity.

Gets and sets the property VerificationStatus. The verification status of the identity: "Pending", "Success", "Failed", or "TemporaryFailure".

Gets and sets the property VerificationToken. The verification token for a domain identity. Null for email address identities.

Response Unmarshaller for AddHeaderAction Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for BounceAction Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for BulkEmailDestinationStatus Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

CloneReceiptRuleSet Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for CloneReceiptRuleSet operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for CloudWatchDestination Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for CloudWatchDimensionConfiguration Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for ConfigurationSet Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

CreateConfigurationSetEventDestination Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for CreateConfigurationSetEventDestination operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

CreateConfigurationSet Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for CreateConfigurationSet operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

CreateConfigurationSetTrackingOptions Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for CreateConfigurationSetTrackingOptions operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

CreateCustomVerificationEmailTemplate Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for CreateCustomVerificationEmailTemplate operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

CreateReceiptFilter Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for CreateReceiptFilter operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

CreateReceiptRule Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for CreateReceiptRule operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

CreateReceiptRuleSet Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for CreateReceiptRuleSet operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

CreateTemplate Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for CreateTemplate operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for CustomVerificationEmailTemplate Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

DeleteConfigurationSetEventDestination Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for DeleteConfigurationSetEventDestination operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

DeleteConfigurationSet Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for DeleteConfigurationSet operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

DeleteConfigurationSetTrackingOptions Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for DeleteConfigurationSetTrackingOptions operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

DeleteCustomVerificationEmailTemplate Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for DeleteCustomVerificationEmailTemplate operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

DeleteIdentityPolicy Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for DeleteIdentityPolicy operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

DeleteIdentity Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for DeleteIdentity operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

DeleteReceiptFilter Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for DeleteReceiptFilter operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

DeleteReceiptRule Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for DeleteReceiptRule operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

DeleteReceiptRuleSet Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for DeleteReceiptRuleSet operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

DeleteTemplate Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for DeleteTemplate operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

DeleteVerifiedEmailAddress Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for DeleteVerifiedEmailAddress operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

DescribeActiveReceiptRuleSet Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for DescribeActiveReceiptRuleSet operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

DescribeConfigurationSet Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for DescribeConfigurationSet operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

DescribeReceiptRule Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for DescribeReceiptRule operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

DescribeReceiptRuleSet Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for DescribeReceiptRuleSet operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for EventDestination Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

GetAccountSendingEnabled Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for GetAccountSendingEnabled operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

GetCustomVerificationEmailTemplate Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for GetCustomVerificationEmailTemplate operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

GetIdentityDkimAttributes Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for GetIdentityDkimAttributes operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

GetIdentityMailFromDomainAttributes Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for GetIdentityMailFromDomainAttributes operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

GetIdentityNotificationAttributes Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for GetIdentityNotificationAttributes operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

GetIdentityPolicies Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for GetIdentityPolicies operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

GetIdentityVerificationAttributes Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for GetIdentityVerificationAttributes operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

GetSendQuota Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for GetSendQuota operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

GetSendStatistics Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for GetSendStatistics operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

GetTemplate Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for GetTemplate operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for IdentityDkimAttributes Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for IdentityMailFromDomainAttributes Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for IdentityNotificationAttributes Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for IdentityVerificationAttributes Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for KinesisFirehoseDestination Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for LambdaAction Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

ListConfigurationSets Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for ListConfigurationSets operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

ListCustomVerificationEmailTemplates Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for ListCustomVerificationEmailTemplates operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

ListIdentities Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for ListIdentities operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

ListIdentityPolicies Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for ListIdentityPolicies operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

ListReceiptFilters Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for ListReceiptFilters operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

ListReceiptRuleSets Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for ListReceiptRuleSets operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

ListTemplates Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for ListTemplates operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

ListVerifiedEmailAddresses Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for ListVerifiedEmailAddresses operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

PutIdentityPolicy Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for PutIdentityPolicy operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for ReceiptAction Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for ReceiptFilter Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for ReceiptIpFilter Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for ReceiptRuleSetMetadata Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for ReceiptRule Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

ReorderReceiptRuleSet Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for ReorderReceiptRuleSet operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for ReputationOptions Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for S3Action Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

SendBounce Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for SendBounce operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

SendBulkTemplatedEmail Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for SendBulkTemplatedEmail operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

SendCustomVerificationEmail Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for SendCustomVerificationEmail operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for SendDataPoint Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

SendEmail Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for SendEmail operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

SendRawEmail Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for SendRawEmail operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

SendTemplatedEmail Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for SendTemplatedEmail operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

SetActiveReceiptRuleSet Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for SetActiveReceiptRuleSet operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

SetIdentityDkimEnabled Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for SetIdentityDkimEnabled operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

SetIdentityFeedbackForwardingEnabled Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for SetIdentityFeedbackForwardingEnabled operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

SetIdentityHeadersInNotificationsEnabled Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for SetIdentityHeadersInNotificationsEnabled operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

SetIdentityMailFromDomain Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for SetIdentityMailFromDomain operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

SetIdentityNotificationTopic Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for SetIdentityNotificationTopic operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

SetReceiptRulePosition Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for SetReceiptRulePosition operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for SNSAction Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for SNSDestination Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for StopAction Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for TemplateMetadata Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for Template Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

TestRenderTemplate Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for TestRenderTemplate operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for TrackingOptions Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

UpdateAccountSendingEnabled Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for UpdateAccountSendingEnabled operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

UpdateConfigurationSetEventDestination Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for UpdateConfigurationSetEventDestination operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

UpdateConfigurationSetReputationMetricsEnabled Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for UpdateConfigurationSetReputationMetricsEnabled operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

UpdateConfigurationSetSendingEnabled Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for UpdateConfigurationSetSendingEnabled operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

UpdateConfigurationSetTrackingOptions Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for UpdateConfigurationSetTrackingOptions operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

UpdateCustomVerificationEmailTemplate Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for UpdateCustomVerificationEmailTemplate operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

UpdateReceiptRule Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for UpdateReceiptRule operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

UpdateTemplate Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for UpdateTemplate operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

VerifyDomainDkim Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for VerifyDomainDkim operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

VerifyDomainIdentity Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for VerifyDomainIdentity operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

VerifyEmailAddress Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for VerifyEmailAddress operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

VerifyEmailIdentity Request Marshaller

Marshaller the request object to the HTTP request.

Gets the singleton.

Response Unmarshaller for VerifyEmailIdentity operation

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

Response Unmarshaller for WorkmailAction Object

Unmarshaller the response from the service to the response class.

Unmarshaller error response to exception.

Gets the singleton.

SimpleEmailService exception

Constructs a new InvalidCloudWatchDestinationException with the specified error message.

Describes the error encountered.

Construct instance of InvalidCloudWatchDestinationException

Constructs a new instance of the InvalidCloudWatchDestinationException class with serialized data.

SimpleEmailService exception

Constructs a new InvalidConfigurationSetException with the specified error message.

Describes the error encountered.

Construct instance of InvalidConfigurationSetException

Constructs a new instance of the InvalidConfigurationSetException class with serialized data.

SimpleEmailService exception

Constructs a new InvalidFirehoseDestinationException with the specified error message.

Describes the error encountered.

Construct instance of InvalidFirehoseDestinationException

Constructs a new instance of the InvalidFirehoseDestinationException class with serialized data.

SimpleEmailService exception

Constructs a new InvalidLambdaFunctionException with the specified error message.

Describes the error encountered.

Construct instance of InvalidLambdaFunctionException

Constructs a new instance of the InvalidLambdaFunctionException class with serialized data.

SimpleEmailService exception

Constructs a new InvalidPolicyException with the specified error message.

Describes the error encountered.

Construct instance of InvalidPolicyException

Constructs a new instance of the InvalidPolicyException class with serialized data.

SimpleEmailService exception

Constructs a new InvalidRenderingParameterException with the specified error message.

Describes the error encountered.

Construct instance of InvalidRenderingParameterException

Constructs a new instance of the InvalidRenderingParameterException class with serialized data.

SimpleEmailService exception

Constructs a new InvalidS3ConfigurationException with the specified error message.

Describes the error encountered.

Construct instance of InvalidS3ConfigurationException

Constructs a new instance of the InvalidS3ConfigurationException class with serialized data.

SimpleEmailService exception

Constructs a new InvalidSNSDestinationException with the specified error message.

Describes the error encountered.

Construct instance of InvalidSNSDestinationException

Constructs a new instance of the InvalidSNSDestinationException class with serialized data.

SimpleEmailService exception

Constructs a new InvalidSnsTopicException with the specified error message.

Describes the error encountered.

Construct instance of InvalidSnsTopicException

Constructs a new instance of the InvalidSnsTopicException class with serialized data.

SimpleEmailService exception

Constructs a new InvalidTemplateException with the specified error message.

Describes the error encountered.

Construct instance of InvalidTemplateException

Constructs a new instance of the InvalidTemplateException class with serialized data.

SimpleEmailService exception

Constructs a new InvalidTrackingOptionsException with the specified error message.

Describes the error encountered.

Construct instance of InvalidTrackingOptionsException

Constructs a new instance of the InvalidTrackingOptionsException class with serialized data.

Contains the delivery stream ARN and the IAM role ARN associated with an Amazon Kinesis Firehose event destination. Event destinations, such as Amazon Kinesis Firehose, are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Gets and sets the property DeliveryStreamARN. The ARN of the Amazon Kinesis Firehose stream that email sending events should be published to.

Gets and sets the property IAMRoleARN. The ARN of the IAM role under which Amazon SES publishes email sending events to the Amazon Kinesis Firehose stream.

When included in a receipt rule, this action calls an AWS Lambda function and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS). To enable Amazon SES to call your AWS Lambda function or to publish to an Amazon SNS topic of another account, Amazon SES must have permission to access those resources. For information about giving permissions, see the Amazon SES Developer Guide. For information about using AWS Lambda actions in receipt rules, see the Amazon SES Developer Guide.

Gets and sets the property FunctionArn. The Amazon Resource Name (ARN) of the AWS Lambda function. An example of an AWS Lambda function ARN is arn:aws:lambda:us-west-2:account-id:function:MyFunction. For more information about AWS Lambda, see the AWS Lambda Developer Guide.

Gets and sets the property InvocationType. The invocation type of the AWS Lambda function. An invocation type of RequestResponse means that the execution of the function will immediately result in a response, and a value of Event means that the function will be invoked asynchronously. The default value is Event. For information about AWS Lambda invocation types, see the AWS Lambda Developer Guide. There is a 30-second timeout on RequestResponse invocations. You should use Event invocation in most cases. Use RequestResponse only when you want to make a mail flow decision, such as whether to stop the receipt rule or the receipt rule set.

Gets and sets the property TopicArn. The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the Lambda action is taken. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.

SimpleEmailService exception

Constructs a new LimitExceededException with the specified error message.

Describes the error encountered.

Construct instance of LimitExceededException

Constructs a new instance of the LimitExceededException class with serialized data.

Container for the parameters to the ListConfigurationSets operation. Provides a list of the configuration sets associated with your Amazon SES account in the current AWS Region. For information about using configuration sets, see Monitoring Your Amazon SES Sending Activity in the Amazon SES Developer Guide. You can execute this operation no more than once per second. This operation will return up to 1,000 configuration sets each time it is run. If your Amazon SES account has more than 1,000 configuration sets, this operation will also return a NextToken element. You can then execute the ListConfigurationSets operation again, passing the NextToken parameter and the value of the NextToken element to retrieve additional results.

Gets and sets the property MaxItems. The number of configuration sets to return.

Gets and sets the property NextToken. A token returned from a previous call to ListConfigurationSets to indicate the position of the configuration set in the configuration set list.

A list of configuration sets associated with your AWS account. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Gets and sets the property ConfigurationSets. A list of configuration sets.

Gets and sets the property NextToken. A token indicating that there are additional configuration sets available to be listed. Pass this token to successive calls of ListConfigurationSets.

Container for the parameters to the ListCustomVerificationEmailTemplates operation. Lists the existing custom verification email templates for your account in the current AWS Region. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property MaxResults. The maximum number of custom verification email templates to return. This value must be at least 1 and less than or equal to 50. If you do not specify a value, or if you specify a value less than 1 or greater than 50, the operation will return up to 50 results.

Gets and sets the property NextToken. An array the contains the name and creation time stamp for each template in your Amazon SES account.

A paginated list of custom verification email templates.

Gets and sets the property CustomVerificationEmailTemplates. A list of the custom verification email templates that exist in your account.

Gets and sets the property NextToken. A token indicating that there are additional custom verification email templates available to be listed. Pass this token to a subsequent call to ListTemplates to retrieve the next 50 custom verification email templates.

Container for the parameters to the ListIdentities operation. Returns a list containing all of the identities (email addresses and domains) for your AWS account in the current AWS Region, regardless of verification status. You can execute this operation no more than once per second.

Gets and sets the property IdentityType. The type of the identities to list. Possible values are "EmailAddress" and "Domain". If this parameter is omitted, then all identities will be listed.

Gets and sets the property MaxItems. The maximum number of identities per page. Possible values are 1-1000 inclusive.

Gets and sets the property NextToken. The token to use for pagination.

A list of all identities that you have attempted to verify under your AWS account, regardless of verification status.

Gets and sets the property Identities. A list of identities.

Gets and sets the property NextToken. The token used for pagination.

Container for the parameters to the ListIdentityPolicies operation. Returns a list of sending authorization policies that are attached to the given identity (an email address or a domain). This API returns only a list. If you want the actual policy content, you can use GetIdentityPolicies. This API is for the identity owner only. If you have not verified the identity, this API will return an error. Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property Identity. The identity that is associated with the policy for which the policies will be listed. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com. To successfully call this API, you must own the identity.

A list of names of sending authorization policies that apply to an identity.

Gets and sets the property PolicyNames. A list of names of policies that apply to the specified identity.

Container for the parameters to the ListReceiptFilters operation. Lists the IP address filters associated with your AWS account in the current AWS Region. For information about managing IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

A list of IP address filters that exist under your AWS account.

Gets and sets the property Filters. A list of IP address filter data structures, which each consist of a name, an IP address range, and whether to allow or block mail from it.

Container for the parameters to the ListReceiptRuleSets operation. Lists the receipt rule sets that exist under your AWS account in the current AWS Region. If there are additional receipt rule sets to be retrieved, you will receive a NextToken that you can provide to the next call to ListReceiptRuleSets to retrieve the additional entries. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property NextToken. A token returned from a previous call to ListReceiptRuleSets to indicate the position in the receipt rule set list.

A list of receipt rule sets that exist under your AWS account.

Gets and sets the property NextToken. A token indicating that there are additional receipt rule sets available to be listed. Pass this token to successive calls of ListReceiptRuleSets to retrieve up to 100 receipt rule sets at a time.

Gets and sets the property RuleSets. The metadata for the currently active receipt rule set. The metadata consists of the rule set name and the timestamp of when the rule set was created.

Container for the parameters to the ListTemplates operation. Lists the email templates present in your Amazon SES account in the current AWS Region. You can execute this operation no more than once per second.

Gets and sets the property MaxItems. The maximum number of templates to return. This value must be at least 1 and less than or equal to 10. If you do not specify a value, or if you specify a value less than 1 or greater than 10, the operation will return up to 10 results.

Gets and sets the property NextToken. A token returned from a previous call to ListTemplates to indicate the position in the list of email templates.

This is the response object from the ListTemplates operation.

Gets and sets the property NextToken. A token indicating that there are additional email templates available to be listed. Pass this token to a subsequent call to ListTemplates to retrieve the next 50 email templates.

Gets and sets the property TemplatesMetadata. An array the contains the name and creation time stamp for each template in your Amazon SES account.

Container for the parameters to the ListVerifiedEmailAddresses operation. Deprecated. Use the ListIdentities operation to list the email addresses and domains associated with your account.

A list of email addresses that you have verified with Amazon SES under your AWS account.

Gets and sets the property VerifiedEmailAddresses. A list of email addresses that have been verified.

SimpleEmailService exception

Constructs a new MailFromDomainNotVerifiedException with the specified error message.

Describes the error encountered.

Construct instance of MailFromDomainNotVerifiedException

Constructs a new instance of the MailFromDomainNotVerifiedException class with serialized data.

Represents the message to be sent, composed of a subject and a body.

Empty constructor used to set properties independently even when a simple constructor is available

Instantiates Message with the parameterized properties

The subject of the message: A short summary of the content, which will appear in the recipient's inbox. The message body.

Gets and sets the property Body. The message body.

Gets and sets the property Subject. The subject of the message: A short summary of the content, which will appear in the recipient's inbox.

Message-related information to include in the Delivery Status Notification (DSN) when an email that Amazon SES receives on your behalf bounces. For information about receiving email through Amazon SES, see the Amazon SES Developer Guide.

Gets and sets the property ArrivalDateUtc. When the message was received by the reporting mail transfer agent (MTA), in RFC 822 date-time format.

Gets and sets the property ExtensionFields. Additional X-headers to include in the DSN.

Gets and sets the property ReportingMta. The reporting MTA that attempted to deliver the message, formatted as specified in RFC 3464 (mta-name-type; mta-name). The default value is dns; inbound-smtp.[region].amazonaws.com.

Gets and sets the property ArrivalDateUtc. This property is deprecated. Setting this property results in non-UTC DateTimes not being marshalled correctly. Use ArrivalDateUtc instead. Setting either ArrivalDate or ArrivalDateUtc results in both ArrivalDate and ArrivalDateUtc being assigned, the latest assignment to either one of the two property is reflected in the value of both. ArrivalDate is provided for backwards compatibility only and assigning a non-Utc DateTime to it results in the wrong timestamp being passed to the service. When the message was received by the reporting mail transfer agent (MTA), in RFC 822 date-time format.

SimpleEmailService exception

Constructs a new MessageRejectedException with the specified error message.

Describes the error encountered.

Construct instance of MessageRejectedException

Constructs a new instance of the MessageRejectedException class with serialized data.

Contains the name and value of a tag that you can provide to SendEmail or SendRawEmail to apply to an email. Message tags, which you use with configuration sets, enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Gets and sets the property Name. The name of the tag. The name must:

This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).
Contain less than 256 characters.

Gets and sets the property Value. The value of the tag. The value must:

This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).
Contain less than 256 characters.

SimpleEmailService exception

Constructs a new MissingRenderingAttributeException with the specified error message.

Describes the error encountered.

Construct instance of MissingRenderingAttributeException

Constructs a new instance of the MissingRenderingAttributeException class with serialized data.

SimpleEmailService exception

Constructs a new ProductionAccessNotGrantedException with the specified error message.

Describes the error encountered.

Construct instance of ProductionAccessNotGrantedException

Constructs a new instance of the ProductionAccessNotGrantedException class with serialized data.

Container for the parameters to the PutIdentityPolicy operation. Adds or updates a sending authorization policy for the specified identity (an email address or a domain). This API is for the identity owner only. If you have not verified the identity, this API will return an error. Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property Identity. The identity that the policy will apply to. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). Examples: user@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com. To successfully call this API, you must own the identity.

Gets and sets the property Policy. The text of the policy in JSON format. The policy cannot exceed 4 KB. For information about the syntax of sending authorization policies, see the Amazon SES Developer Guide.

Gets and sets the property PolicyName. The name of the policy. The policy name cannot exceed 64 characters and can only include alphanumeric characters, dashes, and underscores.

An empty element returned on a successful request.

Represents the raw data of the message.

Empty constructor used to set properties independently even when a simple constructor is available

Instantiates RawMessage with the parameterized properties

The raw data of the message. This data needs to base64-encoded if you are accessing Amazon SES directly through the HTTPS interface. If you are accessing Amazon SES using an AWS SDK, the SDK takes care of the base 64-encoding for you. In all cases, the client must ensure that the message format complies with Internet email standards regarding email header fields, MIME types, and MIME encoding. The To:, CC:, and BCC: headers in the raw message can contain a group list. If you are using SendRawEmail with sending authorization, you can include X-headers in the raw message to specify the "Source," "From," and "Return-Path" addresses. For more information, see the documentation for SendRawEmail. Do not include these X-headers in the DKIM signature, because they are removed by Amazon SES before sending the email. For more information, go to the Amazon SES Developer Guide.

Gets and sets the property Data. The raw data of the message. This data needs to base64-encoded if you are accessing Amazon SES directly through the HTTPS interface. If you are accessing Amazon SES using an AWS SDK, the SDK takes care of the base 64-encoding for you. In all cases, the client must ensure that the message format complies with Internet email standards regarding email header fields, MIME types, and MIME encoding. The To:, CC:, and BCC: headers in the raw message can contain a group list. If you are using SendRawEmail with sending authorization, you can include X-headers in the raw message to specify the "Source," "From," and "Return-Path" addresses. For more information, see the documentation for SendRawEmail. Do not include these X-headers in the DKIM signature, because they are removed by Amazon SES before sending the email. For more information, go to the Amazon SES Developer Guide.

An action that Amazon SES can take when it receives an email on behalf of one or more email addresses or domains that you own. An instance of this data type can represent only one action. For information about setting up receipt rules, see the Amazon SES Developer Guide.

Gets and sets the property AddHeaderAction. Adds a header to the received email.

Gets and sets the property BounceAction. Rejects the received email by returning a bounce response to the sender and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS).

Gets and sets the property LambdaAction. Calls an AWS Lambda function, and optionally, publishes a notification to Amazon SNS.

Gets and sets the property S3Action. Saves the received message to an Amazon Simple Storage Service (Amazon S3) bucket and, optionally, publishes a notification to Amazon SNS.

Gets and sets the property SNSAction. Publishes the email content within a notification to Amazon SNS.

Gets and sets the property StopAction. Terminates the evaluation of the receipt rule set and optionally publishes a notification to Amazon SNS.

Gets and sets the property WorkmailAction. Calls Amazon WorkMail and, optionally, publishes a notification to Amazon Amazon SNS.

A receipt IP address filter enables you to specify whether to accept or reject mail originating from an IP address or range of IP addresses. For information about setting up IP address filters, see the Amazon SES Developer Guide.

Gets and sets the property IpFilter. A structure that provides the IP addresses to block or allow, and whether to block or allow incoming mail from them.

Gets and sets the property Name. The name of the IP address filter. The name must:

This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).
Start and end with a letter or number.
Contain less than 64 characters.

Gets and sets the property Cidr. A single IP address or a range of IP addresses that you want to block or allow, specified in Classless Inter-Domain Routing (CIDR) notation. An example of a single email address is 10.0.0.1. An example of a range of IP addresses is 10.0.0.1/24. For more information about CIDR notation, see RFC 2317.

Gets and sets the property Policy. Indicates whether to block or allow incoming mail from the specified IP addresses.

Receipt rules enable you to specify which actions Amazon SES should take when it receives mail on behalf of one or more email addresses or domains that you own. Each receipt rule defines a set of email addresses or domains that it applies to. If the email addresses or domains match at least one recipient address of the message, Amazon SES executes all of the receipt rule's actions on the message. For information about setting up receipt rules, see the Amazon SES Developer Guide.

Gets and sets the property Actions. An ordered list of actions to perform on messages that match at least one of the recipient email addresses or domains specified in the receipt rule.

Gets and sets the property Enabled. If true, the receipt rule is active. The default value is false.

Gets and sets the property Name. The name of the receipt rule. The name must:

This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).
Start and end with a letter or number.
Contain less than 64 characters.

Gets and sets the property Recipients. The recipient domains and email addresses that the receipt rule applies to. If this field is not specified, this rule will match all recipients under all verified domains.

Gets and sets the property ScanEnabled. If true, then messages that this receipt rule applies to are scanned for spam and viruses. The default value is false.

Gets and sets the property TlsPolicy. Specifies whether Amazon SES should require that incoming email is delivered over a connection encrypted with Transport Layer Security (TLS). If this parameter is set to Require, Amazon SES will bounce emails that are not received over TLS. The default is Optional.

Information about a receipt rule set. A receipt rule set is a collection of rules that specify what Amazon SES should do with mail it receives on behalf of your account's verified domains. For information about setting up receipt rule sets, see the Amazon SES Developer Guide.

Gets and sets the property CreatedTimestamp. The date and time the receipt rule set was created.

Gets and sets the property Name. The name of the receipt rule set. The name must:

This value can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-).
Start and end with a letter or number.
Contain less than 64 characters.

Gets and sets the property Action. The action performed by the reporting mail transfer agent (MTA) as a result of its attempt to deliver the message to the recipient address. This is required by RFC 3464.

Gets and sets the property DiagnosticCode. An extended explanation of what went wrong; this is usually an SMTP response. See RFC 3463 for the correct formatting of this parameter.

Gets and sets the property ExtensionFields. Additional X-headers to include in the DSN.

Gets and sets the property FinalRecipient. The email address that the message was ultimately delivered to. This corresponds to the Final-Recipient in the DSN. If not specified, FinalRecipient will be set to the Recipient specified in the BouncedRecipientInfo structure. Either FinalRecipient or the recipient in BouncedRecipientInfo must be a recipient of the original bounced message. Do not prepend the FinalRecipient email address with rfc 822;, as described in RFC 3798.

Gets and sets the property LastAttemptDateUtc. The time the final delivery attempt was made, in RFC 822 date-time format.

Gets and sets the property RemoteMta. The MTA to which the remote MTA attempted to deliver the message, formatted as specified in RFC 3464 (

mta-name-type;
            mta-name

). This parameter typically applies only to propagating synchronous bounces.

Gets and sets the property Status. The status code that indicates what went wrong. This is required by RFC 3464.

Gets and sets the property LastAttemptDateUtc. This property is deprecated. Setting this property results in non-UTC DateTimes not being marshalled correctly. Use LastAttemptDateUtc instead. Setting either LastAttemptDate or LastAttemptDateUtc results in both LastAttemptDate and LastAttemptDateUtc being assigned, the latest assignment to either one of the two property is reflected in the value of both. LastAttemptDate is provided for backwards compatibility only and assigning a non-Utc DateTime to it results in the wrong timestamp being passed to the service. The time the final delivery attempt was made, in RFC 822 date-time format.

Container for the parameters to the ReorderReceiptRuleSet operation. Reorders the receipt rules within a receipt rule set. All of the rules in the rule set must be represented in this request. That is, this API will return an error if the reorder request doesn't explicitly position all of the rules. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property RuleNames. A list of the specified receipt rule set's receipt rules in the order that you want to put them.

Gets and sets the property RuleSetName. The name of the receipt rule set to reorder.

An empty element returned on a successful request.

Contains information about the reputation settings for a configuration set.

Gets and sets the property LastFreshStart. The date and time at which the reputation metrics for the configuration set were last reset. Resetting these metrics is known as a fresh start. When you disable email sending for a configuration set using UpdateConfigurationSetSendingEnabled and later re-enable it, the reputation metrics for the configuration set (but not for the entire Amazon SES account) are reset. If email sending for the configuration set has never been disabled and later re-enabled, the value of this attribute is null.

Gets and sets the property ReputationMetricsEnabled. Describes whether or not Amazon SES publishes reputation metrics for the configuration set, such as bounce and complaint rates, to Amazon CloudWatch. If the value is true, reputation metrics are published. If the value is false, reputation metrics are not published. The default value is false.

Gets and sets the property SendingEnabled. Describes whether email sending is enabled or disabled for the configuration set. If the value is true, then Amazon SES will send emails that use the configuration set. If the value is false, Amazon SES will not send emails that use the configuration set. The default value is true. You can change this setting using UpdateConfigurationSetSendingEnabled.

SimpleEmailService exception

Constructs a new RuleDoesNotExistException with the specified error message.

Describes the error encountered.

Construct instance of RuleDoesNotExistException

Constructs a new instance of the RuleDoesNotExistException class with serialized data.

SimpleEmailService exception

Constructs a new RuleSetDoesNotExistException with the specified error message.

Describes the error encountered.

Construct instance of RuleSetDoesNotExistException

Constructs a new instance of the RuleSetDoesNotExistException class with serialized data.

When included in a receipt rule, this action saves the received message to an Amazon Simple Storage Service (Amazon S3) bucket and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS). To enable Amazon SES to write emails to your Amazon S3 bucket, use an AWS KMS key to encrypt your emails, or publish to an Amazon SNS topic of another account, Amazon SES must have permission to access those resources. For information about giving permissions, see the Amazon SES Developer Guide. When you save your emails to an Amazon S3 bucket, the maximum email size (including headers) is 30 MB. Emails larger than that will bounce. For information about specifying Amazon S3 actions in receipt rules, see the Amazon SES Developer Guide.

Gets and sets the property BucketName. The name of the Amazon S3 bucket that incoming email will be saved to.

Gets and sets the property KmsKeyArn. The customer master key that Amazon SES should use to encrypt your emails before saving them to the Amazon S3 bucket. You can use the default master key or a custom master key you created in AWS KMS as follows:

To use the default master key, provide an ARN in the form of arn:aws:kms:REGION:ACCOUNT-ID-WITHOUT-HYPHENS:alias/aws/ses. For example, if your AWS account ID is 123456789012 and you want to use the default master key in the US West (Oregon) region, the ARN of the default master key would be arn:aws:kms:us-west-2:123456789012:alias/aws/ses. If you use the default master key, you don't need to perform any extra steps to give Amazon SES permission to use the key.
To use a custom master key you created in AWS KMS, provide the ARN of the master key and ensure that you add a statement to your key's policy to give Amazon SES permission to use it. For more information about giving permissions, see the Amazon SES Developer Guide.

For more information about key policies, see the AWS KMS Developer Guide. If you do not specify a master key, Amazon SES will not encrypt your emails. Your mail is encrypted by Amazon SES using the Amazon S3 encryption client before the mail is submitted to Amazon S3 for storage. It is not encrypted using Amazon S3 server-side encryption. This means that you must use the Amazon S3 encryption client to decrypt the email after retrieving it from Amazon S3, as the service has no access to use your AWS KMS keys for decryption. This encryption client is currently available with the AWS SDK for Java and AWS SDK for Ruby only. For more information about client-side encryption using AWS KMS master keys, see the Amazon S3 Developer Guide.

Gets and sets the property ObjectKeyPrefix. The key prefix of the Amazon S3 bucket. The key prefix is similar to a directory name that enables you to store similar data under the same directory in a bucket.

Gets and sets the property TopicArn. The ARN of the Amazon SNS topic to notify when the message is saved to the Amazon S3 bucket. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.

Container for the parameters to the SendBounce operation. Generates and sends a bounce message to the sender of an email you received through Amazon SES. You can only use this API on an email up to 24 hours after you receive it. You cannot use this API to send generic bounces for mail that was not received by Amazon SES. For information about receiving email through Amazon SES, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property BouncedRecipientInfoList. A list of recipients of the bounced message, including the information required to create the Delivery Status Notifications (DSNs) for the recipients. You must specify at least one BouncedRecipientInfo in the list.

Gets and sets the property BounceSender. The address to use in the "From" header of the bounce message. This must be an identity that you have verified with Amazon SES.

Gets and sets the property BounceSenderArn. This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the address in the "From" header of the bounce. For more information about sending authorization, see the Amazon SES Developer Guide.

Gets and sets the property Explanation. Human-readable text for the bounce message to explain the failure. If not specified, the text will be auto-generated based on the bounced recipient information.

Gets and sets the property MessageDsn. Message-related DSN fields. If not specified, Amazon SES will choose the values.

Gets and sets the property OriginalMessageId. The message ID of the message to be bounced.

Represents a unique message ID.

Gets and sets the property MessageId. The message ID of the bounce message.

Container for the parameters to the SendBulkTemplatedEmail operation. Composes an email message to multiple destinations. The message body is created using an email template. In order to send email using the SendBulkTemplatedEmail operation, your call to the API must meet the following requirements:

The call must refer to an existing email template. You can create email templates using the CreateTemplate operation.
The message must be sent from a verified email address or domain.
If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.
The maximum message size is 10 MB.
Each Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.
The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendBulkTemplatedEmail operation several times to send the message to each group.
The number of destinations you can contact in a single call to the API may be limited by your account's maximum sending rate.

Gets and sets the property ConfigurationSetName. The name of the configuration set to use when you send an email using SendBulkTemplatedEmail.

Gets and sets the property DefaultTags. A list of tags, in the form of name/value pairs, to apply to an email that you send to a destination using SendBulkTemplatedEmail.

Gets and sets the property DefaultTemplateData. A list of replacement values to apply to the template when replacement data is not specified in a Destination object. These values act as a default or fallback option when no other data is available. The template data is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.

Gets and sets the property Destinations. One or more Destination objects. All of the recipients in a Destination will receive the same version of the email. You can specify up to 50 Destination objects within a Destinations array.

Gets and sets the property ReplyToAddresses. The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address will receive the reply.

Gets and sets the property ReturnPath. The email address that bounces and complaints will be forwarded to when feedback forwarding is enabled. If the message cannot be delivered to the recipient, then an error message will be returned from the recipient's ISP; this message will then be forwarded to the email address specified by the ReturnPath parameter. The ReturnPath parameter is never overwritten. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES.

Gets and sets the property Source. The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide. If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide. Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described in RFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=.

Gets and sets the property Template. The template to use when sending this email.

Gets and sets the property TemplateArn. The ARN of the template to use when sending this email.

This is the response object from the SendBulkTemplatedEmail operation.

Gets and sets the property Status. The unique message identifier returned from the SendBulkTemplatedEmail action.

Container for the parameters to the SendCustomVerificationEmail operation. Adds an email address to the list of identities for your Amazon SES account in the current AWS Region and attempts to verify it. As a result of executing this operation, a customized verification email is sent to the specified address. To use this operation, you must first create a custom verification email template. For more information about creating and using custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property ConfigurationSetName. Name of a configuration set to use when sending the verification email.

Gets and sets the property EmailAddress. The email address to verify.

Gets and sets the property TemplateName. The name of the custom verification email template to use when sending the verification email.

The response received when attempting to send the custom verification email.

Gets and sets the property MessageId. The unique message identifier returned from the SendCustomVerificationEmail operation.

Represents sending statistics data. Each SendDataPoint contains statistics for a 15-minute period of sending activity.

Gets and sets the property Bounces. Number of emails that have bounced.

Gets and sets the property Complaints. Number of unwanted emails that were rejected by recipients.

Gets and sets the property DeliveryAttempts. Number of emails that have been sent.

Gets and sets the property Rejects. Number of emails rejected by Amazon SES.

Gets and sets the property Timestamp. Time of the data point.

Container for the parameters to the SendEmail operation. Composes an email message and immediately queues it for sending. In order to send email using the SendEmail operation, your message must meet the following requirements:

The message must be sent from a verified email address or domain. If you attempt to send email using a non-verified address or domain, the operation will result in an "Email address not verified" error.
If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.
The maximum message size is 10 MB.
The message must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.
The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendEmail operation several times to send the message to each group.

For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits in the Amazon SES Developer Guide.

Empty constructor used to set properties independently even when a simple constructor is available

Instantiates SendEmailRequest with the parameterized properties

The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide. If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide. Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described in RFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=. The destination for this email, composed of To:, CC:, and BCC: fields. The message to be sent.

Gets and sets the property ConfigurationSetName. The name of the configuration set to use when you send an email using SendEmail.

Gets and sets the property Destination. The destination for this email, composed of To:, CC:, and BCC: fields.

Gets and sets the property Message. The message to be sent.

Gets and sets the property ReplyToAddresses. The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address will receive the reply.

Gets and sets the property Tags. A list of tags, in the form of name/value pairs, to apply to an email that you send using SendEmail. Tags correspond to characteristics of the email that you define, so that you can publish email sending events.

Represents a unique message ID.

Gets and sets the property MessageId. The unique message identifier returned from the SendEmail action.

Container for the parameters to the SendRawEmail operation. Composes an email message and immediately queues it for sending. This operation is more flexible than the SendEmail API operation. When you use the SendRawEmail operation, you can specify the headers of the message as well as its content. This flexibility is useful, for example, when you want to send a multipart MIME email (such a message that contains both a text and an HTML version). You can also use this operation to send messages that include attachments. The SendRawEmail operation has the following requirements:

You can only send email from verified email addresses or domains. If you try to send email from an address that isn't verified, the operation results in an "Email address not verified" error.
If your account is still in the Amazon SES sandbox, you can only send email to other verified addresses in your account, or to addresses that are associated with the Amazon SES mailbox simulator.
The maximum message size, including attachments, is 10 MB.
Each message has to include at least one recipient address. A recipient address includes any address on the To:, CC:, or BCC: lines.
If you send a single message to more than one recipient address, and one of the recipient addresses isn't in a valid format (that is, it's not in the format UserName@[SubDomain.]Domain.TopLevelDomain), Amazon SES rejects the entire message, even if the other addresses are valid.
Each message can include up to 50 recipient addresses across the To:, CC:, or BCC: lines. If you need to send a single message to more than 50 recipients, you have to split the list of recipient addresses into groups of less than 50 recipients, and send separate messages to each group.
Amazon SES allows you to specify 8-bit Content-Transfer-Encoding for MIME message parts. However, if Amazon SES has to modify the contents of your message (for example, if you use open and click tracking), 8-bit content isn't preserved. For this reason, we highly recommend that you encode all content that isn't 7-bit ASCII. For more information, see MIME Encoding in the Amazon SES Developer Guide.

Additionally, keep the following considerations in mind when using the SendRawEmail operation:

Although you can customize the message headers when using the SendRawEmail operation, Amazon SES will automatically apply its own Message-ID and Date headers; if you passed these headers when creating the message, they will be overwritten by the values that Amazon SES provides.
If you are using sending authorization to send on behalf of another user, SendRawEmail enables you to specify the cross-account identity for the email's Source, From, and Return-Path parameters in one of two ways: you can pass optional parameters SourceArn, FromArn, and/or ReturnPathArn to the API, or you can include the following X-headers in the header of your raw email:
- X-SES-SOURCE-ARN
- X-SES-FROM-ARN
- X-SES-RETURN-PATH-ARN
Do not include these X-headers in the DKIM signature; Amazon SES will remove them before sending the email. For most common sending authorization scenarios, we recommend that you specify the SourceIdentityArn parameter and not the FromIdentityArn or ReturnPathIdentityArn parameters. If you only specify the SourceIdentityArn parameter, Amazon SES will set the From and Return Path addresses to the identity specified in SourceIdentityArn. For more information about sending authorization, see the Using Sending Authorization with Amazon SES in the Amazon SES Developer Guide.
For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits in the Amazon SES Developer Guide.

Empty constructor used to set properties independently even when a simple constructor is available

Instantiates SendRawEmailRequest with the parameterized properties

The raw email message itself. The message has to meet the following criteria:

The message has to contain a header and a body, separated by a blank line.
All of the required header fields must be present in the message.
Each part of a multipart MIME message must be formatted properly.
Attachments must be of a content type that Amazon SES supports. For a list on unsupported content types, see Unsupported Attachment Types in the Amazon SES Developer Guide.
The entire message must be base64-encoded.
If any of the MIME parts in your message contain content that is outside of the 7-bit ASCII character range, we highly recommend that you encode that content. For more information, see Sending Raw Email in the Amazon SES Developer Guide.
Per RFC 5321, the maximum length of each line of text, including the <CRLF>, must not exceed 1,000 characters.

Gets and sets the property ConfigurationSetName. The name of the configuration set to use when you send an email using SendRawEmail.

Gets and sets the property Destinations. A list of destinations for the message, consisting of To:, CC:, and BCC: addresses.

Gets and sets the property FromArn. This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to specify a particular "From" address in the header of the raw email. Instead of using this parameter, you can use the X-header X-SES-FROM-ARN in the raw message of the email. If you use both the FromArn parameter and the corresponding X-header, Amazon SES uses the value of the FromArn parameter. For information about when to use this parameter, see the description of SendRawEmail in this guide, or see the Amazon SES Developer Guide.

Gets and sets the property RawMessage. The raw email message itself. The message has to meet the following criteria:

The message has to contain a header and a body, separated by a blank line.
All of the required header fields must be present in the message.
Each part of a multipart MIME message must be formatted properly.
Attachments must be of a content type that Amazon SES supports. For a list on unsupported content types, see Unsupported Attachment Types in the Amazon SES Developer Guide.
The entire message must be base64-encoded.
If any of the MIME parts in your message contain content that is outside of the 7-bit ASCII character range, we highly recommend that you encode that content. For more information, see Sending Raw Email in the Amazon SES Developer Guide.
Per RFC 5321, the maximum length of each line of text, including the <CRLF>, must not exceed 1,000 characters.

Gets and sets the property ReturnPathArn. This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath parameter. For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to use feedback@example.com, then you would specify the ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the ReturnPath to be feedback@example.com. Instead of using this parameter, you can use the X-header X-SES-RETURN-PATH-ARN in the raw message of the email. If you use both the ReturnPathArn parameter and the corresponding X-header, Amazon SES uses the value of the ReturnPathArn parameter. For information about when to use this parameter, see the description of SendRawEmail in this guide, or see the Amazon SES Developer Guide.

Gets and sets the property Source. The identity's email address. If you do not provide a value for this parameter, you must specify a "From" address in the raw text of the message. (You can also specify both.) Amazon SES does not support the SMTPUTF8 extension, as described inRFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described in RFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=. If you specify the Source parameter and have feedback forwarding enabled, then bounces and complaints will be sent to this email address. This takes precedence over any Return-Path header that you might include in the raw text of the message.

Gets and sets the property SourceArn. This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source parameter. For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to send from user@example.com, then you would specify the SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the Source to be user@example.com. Instead of using this parameter, you can use the X-header X-SES-SOURCE-ARN in the raw message of the email. If you use both the SourceArn parameter and the corresponding X-header, Amazon SES uses the value of the SourceArn parameter. For information about when to use this parameter, see the description of SendRawEmail in this guide, or see the Amazon SES Developer Guide.

Gets and sets the property Tags. A list of tags, in the form of name/value pairs, to apply to an email that you send using SendRawEmail. Tags correspond to characteristics of the email that you define, so that you can publish email sending events.

Represents a unique message ID.

Gets and sets the property MessageId. The unique message identifier returned from the SendRawEmail action.

Container for the parameters to the SendTemplatedEmail operation. Composes an email message using an email template and immediately queues it for sending. In order to send email using the SendTemplatedEmail operation, your call to the API must meet the following requirements:

The call must refer to an existing email template. You can create email templates using the CreateTemplate operation.
The message must be sent from a verified email address or domain.
If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.
The maximum message size is 10 MB.
Calls to the SendTemplatedEmail operation may only include one Destination parameter. A destination is a set of recipients who will receive the same version of the email. The Destination parameter can include up to 50 recipients, across the To:, CC: and BCC: fields.
The Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.

If your call to the SendTemplatedEmail operation includes all of the required parameters, Amazon SES accepts it and returns a Message ID. However, if Amazon SES can't render the email because the template contains errors, it doesn't send the email. Additionally, because it already accepted the message, Amazon SES doesn't return a message stating that it was unable to send the email. For these reasons, we highly recommend that you set up Amazon SES to send you notifications when Rendering Failure events occur. For more information, see Sending Personalized Email Using the Amazon SES API in the Amazon Simple Email Service Developer Guide.

Gets and sets the property ConfigurationSetName. The name of the configuration set to use when you send an email using SendTemplatedEmail.

Gets and sets the property Destination. The destination for this email, composed of To:, CC:, and BCC: fields. A Destination can include up to 50 recipients across these three fields.

Gets and sets the property ReplyToAddresses. The reply-to email address(es) for the message. If the recipient replies to the message, each reply-to address will receive the reply.

Gets and sets the property Source. The email address that is sending the email. This email address must be either individually verified with Amazon SES, or from a domain that has been verified with Amazon SES. For information about verifying identities, see the Amazon SES Developer Guide. If you are sending on behalf of another user and have been permitted to do so by a sending authorization policy, then you must also specify the SourceArn parameter. For more information about sending authorization, see the Amazon SES Developer Guide. Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described inRFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=.

Gets and sets the property Tags. A list of tags, in the form of name/value pairs, to apply to an email that you send using SendTemplatedEmail. Tags correspond to characteristics of the email that you define, so that you can publish email sending events.

Gets and sets the property Template. The template to use when sending this email.

Gets and sets the property TemplateArn. The ARN of the template to use when sending this email.

Gets and sets the property TemplateData. A list of replacement values to apply to the template. This parameter is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.

This is the response object from the SendTemplatedEmail operation.

Gets and sets the property MessageId. The unique message identifier returned from the SendTemplatedEmail action.

Container for the parameters to the SetActiveReceiptRuleSet operation. Sets the specified receipt rule set as the active receipt rule set. To disable your email-receiving through Amazon SES completely, you can call this API with RuleSetName set to null. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property RuleSetName. The name of the receipt rule set to make active. Setting this value to null disables all email receiving.

An empty element returned on a successful request.

Container for the parameters to the SetIdentityDkimEnabled operation. Enables or disables Easy DKIM signing of email sent from an identity:

If Easy DKIM signing is enabled for a domain name identity (such as example.com), then Amazon SES will DKIM-sign all email sent by addresses under that domain name (for example, user@example.com).
If Easy DKIM signing is enabled for an email address, then Amazon SES will DKIM-sign all email sent by that email address.

For email addresses (for example, user@example.com), you can only enable Easy DKIM signing if the corresponding domain (in this case, example.com) has been set up for Easy DKIM using the AWS Console or the VerifyDomainDkim operation. You can execute this operation no more than once per second. For more information about Easy DKIM signing, go to the Amazon SES Developer Guide.

Gets and sets the property DkimEnabled. Sets whether DKIM signing is enabled for an identity. Set to true to enable DKIM signing for this identity; false to disable it.

Gets and sets the property Identity. The identity for which DKIM signing should be enabled or disabled.

An empty element returned on a successful request.

Container for the parameters to the SetIdentityFeedbackForwardingEnabled operation. Given an identity (an email address or a domain), enables or disables whether Amazon SES forwards bounce and complaint notifications as email. Feedback forwarding can only be disabled when Amazon Simple Notification Service (Amazon SNS) topics are specified for both bounces and complaints. Feedback forwarding does not apply to delivery notifications. Delivery notifications are only available through Amazon SNS. You can execute this operation no more than once per second. For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.

Gets and sets the property ForwardingEnabled. Sets whether Amazon SES will forward bounce and complaint notifications as email. true specifies that Amazon SES will forward bounce and complaint notifications as email, in addition to any Amazon SNS topic publishing otherwise specified. false specifies that Amazon SES will publish bounce and complaint notifications only through Amazon SNS. This value can only be set to false when Amazon SNS topics are set for both Bounce and Complaint notification types.

Gets and sets the property Identity. The identity for which to set bounce and complaint notification forwarding. Examples: user@example.com, example.com.

An empty element returned on a successful request.

Container for the parameters to the SetIdentityHeadersInNotificationsEnabled operation. Given an identity (an email address or a domain), sets whether Amazon SES includes the original email headers in the Amazon Simple Notification Service (Amazon SNS) notifications of a specified type. You can execute this operation no more than once per second. For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.

Gets and sets the property Enabled. Sets whether Amazon SES includes the original email headers in Amazon SNS notifications of the specified notification type. A value of true specifies that Amazon SES will include headers in notifications, and a value of false specifies that Amazon SES will not include headers in notifications. This value can only be set when NotificationType is already set to use a particular Amazon SNS topic.

Gets and sets the property Identity. The identity for which to enable or disable headers in notifications. Examples: user@example.com, example.com.

Gets and sets the property NotificationType. The notification type for which to enable or disable headers in notifications.

An empty element returned on a successful request.

Container for the parameters to the SetIdentityMailFromDomain operation. Enables or disables the custom MAIL FROM domain setup for a verified identity (an email address or a domain). To send emails using the specified MAIL FROM domain, you must add an MX record to your MAIL FROM domain's DNS settings. If you want your emails to pass Sender Policy Framework (SPF) checks, you must also add or update an SPF record. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property BehaviorOnMXFailure. The action that you want Amazon SES to take if it cannot successfully read the required MX record when you send an email. If you choose UseDefaultValue, Amazon SES will use amazonses.com (or a subdomain of that) as the MAIL FROM domain. If you choose RejectMessage, Amazon SES will return a MailFromDomainNotVerified error and not send the email. The action specified in BehaviorOnMXFailure is taken when the custom MAIL FROM domain setup is in the Pending, Failed, and TemporaryFailure states.

Gets and sets the property Identity. The verified identity for which you want to enable or disable the specified custom MAIL FROM domain.

Gets and sets the property MailFromDomain. The custom MAIL FROM domain that you want the verified identity to use. The MAIL FROM domain must 1) be a subdomain of the verified identity, 2) not be used in a "From" address if the MAIL FROM domain is the destination of email feedback forwarding (for more information, see the Amazon SES Developer Guide), and 3) not be used to receive emails. A value of null disables the custom MAIL FROM setting for the identity.

An empty element returned on a successful request.

Container for the parameters to the SetIdentityNotificationTopic operation. Sets an Amazon Simple Notification Service (Amazon SNS) topic to use when delivering notifications. When you use this operation, you specify a verified identity, such as an email address or domain. When you send an email that uses the chosen identity in the Source field, Amazon SES sends notifications to the topic you specified. You can send bounce, complaint, or delivery notifications (or any combination of the three) to the Amazon SNS topic that you specify. You can execute this operation no more than once per second. For more information about feedback notification, see the Amazon SES Developer Guide.

Gets and sets the property Identity. The identity (email address or domain) that you want to set the Amazon SNS topic for. You can only specify a verified identity for this parameter. You can specify an identity by using its name or by using its Amazon Resource Name (ARN). The following examples are all valid identities: sender@example.com, example.com, arn:aws:ses:us-east-1:123456789012:identity/example.com.

Gets and sets the property NotificationType. The type of notifications that will be published to the specified Amazon SNS topic.

Gets and sets the property SnsTopic. The Amazon Resource Name (ARN) of the Amazon SNS topic. If the parameter is omitted from the request or a null value is passed, SnsTopic is cleared and publishing is disabled.

An empty element returned on a successful request.

Container for the parameters to the SetReceiptRulePosition operation. Sets the position of the specified receipt rule in the receipt rule set. For information about managing receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property After. The name of the receipt rule after which to place the specified receipt rule.

Gets and sets the property RuleName. The name of the receipt rule to reposition.

Gets and sets the property RuleSetName. The name of the receipt rule set that contains the receipt rule to reposition.

An empty element returned on a successful request.

When included in a receipt rule, this action publishes a notification to Amazon Simple Notification Service (Amazon SNS). This action includes a complete copy of the email content in the Amazon SNS notifications. Amazon SNS notifications for all other actions simply provide information about the email. They do not include the email content itself. If you own the Amazon SNS topic, you don't need to do anything to give Amazon SES permission to publish emails to it. However, if you don't own the Amazon SNS topic, you need to attach a policy to the topic to give Amazon SES permissions to access it. For information about giving permissions, see the Amazon SES Developer Guide. You can only publish emails that are 150 KB or less (including the header) to Amazon SNS. Larger emails will bounce. If you anticipate emails larger than 150 KB, use the S3 action instead. For information about using a receipt rule to publish an Amazon SNS notification, see the Amazon SES Developer Guide.

Gets and sets the property Encoding. The encoding to use for the email within the Amazon SNS notification. UTF-8 is easier to use, but may not preserve all special characters when a message was encoded with a different encoding format. Base64 preserves all special characters. The default value is UTF-8.

Gets and sets the property TopicArn. The Amazon Resource Name (ARN) of the Amazon SNS topic to notify. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.

Contains the topic ARN associated with an Amazon Simple Notification Service (Amazon SNS) event destination. Event destinations, such as Amazon SNS, are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Gets and sets the property TopicARN. The ARN of the Amazon SNS topic that email sending events will be published to. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.

When included in a receipt rule, this action terminates the evaluation of the receipt rule set and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS). For information about setting a stop action in a receipt rule, see the Amazon SES Developer Guide.

Gets and sets the property Scope. The name of the RuleSet that is being stopped.

Gets and sets the property TopicArn. The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the stop action is taken. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.

The content of the email, composed of a subject line, an HTML part, and a text-only part.

Gets and sets the property HtmlPart. The HTML body of the email.

Gets and sets the property SubjectPart. The subject line of the email.

Gets and sets the property TemplateName. The name of the template. You will refer to this name when you send email using the SendTemplatedEmail or SendBulkTemplatedEmail operations.

Gets and sets the property TextPart. The email body that will be visible to recipients whose email clients do not display HTML.

SimpleEmailService exception

Constructs a new TemplateDoesNotExistException with the specified error message.

Describes the error encountered.

Construct instance of TemplateDoesNotExistException

Constructs a new instance of the TemplateDoesNotExistException class with serialized data.

Contains information about an email template.

Gets and sets the property CreatedTimestamp. The time and date the template was created.

Gets and sets the property Name. The name of the template.

Container for the parameters to the TestRenderTemplate operation. Creates a preview of the MIME content of an email when provided with a template and a set of replacement data. You can execute this operation no more than once per second.

Gets and sets the property TemplateName. The name of the template that you want to render.

This is the response object from the TestRenderTemplate operation.

Gets and sets the property RenderedTemplate. The complete MIME message rendered by applying the data in the TemplateData parameter to the template specified in the TemplateName parameter.

A domain that is used to redirect email recipients to an Amazon SES-operated domain. This domain captures open and click events generated by Amazon SES emails. For more information, see Configuring Custom Domains to Handle Open and Click Tracking in the Amazon SES Developer Guide.

Gets and sets the property CustomRedirectDomain. The custom subdomain that will be used to redirect email recipients to the Amazon SES event tracking domain.

SimpleEmailService exception

Constructs a new TrackingOptionsAlreadyExistsException with the specified error message.

Describes the error encountered.

Construct instance of TrackingOptionsAlreadyExistsException

Constructs a new instance of the TrackingOptionsAlreadyExistsException class with serialized data.

SimpleEmailService exception

Constructs a new TrackingOptionsDoesNotExistException with the specified error message.

Describes the error encountered.

Construct instance of TrackingOptionsDoesNotExistException

Constructs a new instance of the TrackingOptionsDoesNotExistException class with serialized data.

Container for the parameters to the UpdateAccountSendingEnabled operation. Enables or disables email sending across your entire Amazon SES account in the current AWS Region. You can use this operation in conjunction with Amazon CloudWatch alarms to temporarily pause email sending across your Amazon SES account in a given AWS Region when reputation metrics (such as your bounce or complaint rates) reach certain thresholds. You can execute this operation no more than once per second.

Gets and sets the property Enabled. Describes whether email sending is enabled or disabled for your Amazon SES account in the current AWS Region.

This is the response object from the UpdateAccountSendingEnabled operation.

Container for the parameters to the UpdateConfigurationSetEventDestination operation. Updates the event destination of a configuration set. Event destinations are associated with configuration sets, which enable you to publish email sending events to Amazon CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS). For information about using configuration sets, see Monitoring Your Amazon SES Sending Activity in the Amazon SES Developer Guide. When you create or update an event destination, you must provide one, and only one, destination. The destination can be Amazon CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS). You can execute this operation no more than once per second.

Gets and sets the property ConfigurationSetName. The name of the configuration set that contains the event destination that you want to update.

Gets and sets the property EventDestination. The event destination object that you want to apply to the specified configuration set.

An empty element returned on a successful request.

Container for the parameters to the UpdateConfigurationSetReputationMetricsEnabled operation. Enables or disables the publishing of reputation metrics for emails sent using a specific configuration set in a given AWS Region. Reputation metrics include bounce and complaint rates. These metrics are published to Amazon CloudWatch. By using CloudWatch, you can create alarms when bounce or complaint rates exceed certain thresholds. You can execute this operation no more than once per second.

Gets and sets the property ConfigurationSetName. The name of the configuration set that you want to update.

Gets and sets the property Enabled. Describes whether or not Amazon SES will publish reputation metrics for the configuration set, such as bounce and complaint rates, to Amazon CloudWatch.

This is the response object from the UpdateConfigurationSetReputationMetricsEnabled operation.

Container for the parameters to the UpdateConfigurationSetSendingEnabled operation. Enables or disables email sending for messages sent using a specific configuration set in a given AWS Region. You can use this operation in conjunction with Amazon CloudWatch alarms to temporarily pause email sending for a configuration set when the reputation metrics for that configuration set (such as your bounce on complaint rate) exceed certain thresholds. You can execute this operation no more than once per second.

Gets and sets the property ConfigurationSetName. The name of the configuration set that you want to update.

Gets and sets the property Enabled. Describes whether email sending is enabled or disabled for the configuration set.

This is the response object from the UpdateConfigurationSetSendingEnabled operation.

Container for the parameters to the UpdateConfigurationSetTrackingOptions operation. Modifies an association between a configuration set and a custom domain for open and click event tracking. By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using custom domains, see the Amazon SES Developer Guide.

Gets and sets the property ConfigurationSetName. The name of the configuration set for which you want to update the custom tracking domain.

Gets and sets the property TrackingOptions.

An empty element returned on a successful request.

Container for the parameters to the UpdateCustomVerificationEmailTemplate operation. Updates an existing custom verification email template. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property FailureRedirectionURL. The URL that the recipient of the verification email is sent to if his or her address is not successfully verified.

Gets and sets the property FromEmailAddress. The email address that the custom verification email is sent from.

Gets and sets the property SuccessRedirectionURL. The URL that the recipient of the verification email is sent to if his or her address is successfully verified.

Gets and sets the property TemplateName. The name of the custom verification email template that you want to update.

Gets and sets the property TemplateSubject. The subject line of the custom verification email.

This is the response object from the UpdateCustomVerificationEmailTemplate operation.

Container for the parameters to the UpdateReceiptRule operation. Updates a receipt rule. For information about managing receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property Rule. A data structure that contains the updated receipt rule information.

Gets and sets the property RuleSetName. The name of the receipt rule set that the receipt rule belongs to.

An empty element returned on a successful request.

Container for the parameters to the UpdateTemplate operation. Updates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property Template.

This is the response object from the UpdateTemplate operation.

Container for the parameters to the VerifyDomainDkim operation. Returns a set of DKIM tokens for a domain. DKIM tokens are character strings that represent your domain's identity. Using these tokens, you will need to create DNS CNAME records that point to DKIM public keys hosted by Amazon SES. Amazon Web Services will eventually detect that you have updated your DNS records; this detection process may take up to 72 hours. Upon successful detection, Amazon SES will be able to DKIM-sign email originating from that domain. You can execute this operation no more than once per second. To enable or disable Easy DKIM signing for a domain, use the SetIdentityDkimEnabled operation. For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.

Gets and sets the property Domain. The name of the domain to be verified for Easy DKIM signing.

Returns CNAME records that you must publish to the DNS server of your domain to set up Easy DKIM with Amazon SES.

Gets and sets the property DkimTokens. A set of character strings that represent the domain's identity. If the identity is an email address, the tokens represent the domain of that address. Using these tokens, you will need to create DNS CNAME records that point to DKIM public keys hosted by Amazon SES. Amazon Web Services will eventually detect that you have updated your DNS records; this detection process may take up to 72 hours. Upon successful detection, Amazon SES will be able to DKIM-sign emails originating from that domain. For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.

Container for the parameters to the VerifyDomainIdentity operation. Adds a domain to the list of identities for your Amazon SES account in the current AWS Region and attempts to verify it. For more information about verifying domains, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Gets and sets the property Domain. The domain to be verified.

Returns a TXT record that you must publish to the DNS server of your domain to complete domain verification with Amazon SES.

Gets and sets the property VerificationToken. A TXT record that you must place in the DNS settings of the domain to complete domain verification with Amazon SES. As Amazon SES searches for the TXT record, the domain's verification status is "Pending". When Amazon SES detects the record, the domain's verification status changes to "Success". If Amazon SES is unable to detect the record within 72 hours, the domain's verification status changes to "Failed." In that case, if you still want to verify the domain, you must restart the verification process from the beginning.

Container for the parameters to the VerifyEmailAddress operation. Deprecated. Use the VerifyEmailIdentity operation to verify a new email address.

Gets and sets the property EmailAddress. The email address to be verified.

This is the response object from the VerifyEmailAddress operation.

Container for the parameters to the VerifyEmailIdentity operation. Adds an email address to the list of identities for your Amazon SES account in the current AWS region and attempts to verify it. As a result of executing this operation, a verification email is sent to the specified address. You can execute this operation no more than once per second.

Gets and sets the property EmailAddress. The email address to be verified.

An empty element returned on a successful request.

When included in a receipt rule, this action calls Amazon WorkMail and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS). You will typically not use this action directly because Amazon WorkMail adds the rule automatically during its setup procedure. For information using a receipt rule to call Amazon WorkMail, see the Amazon SES Developer Guide.

Gets and sets the property OrganizationArn. The ARN of the Amazon WorkMail organization. An example of an Amazon WorkMail organization ARN is arn:aws:workmail:us-west-2:123456789012:organization/m-68755160c4cb4e29a2b2f8fb58f359d7. For information about Amazon WorkMail organizations, see the Amazon WorkMail Administrator Guide.

Gets and sets the property TopicArn. The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the WorkMail action is called. An example of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about Amazon SNS topics, see the Amazon SNS Developer Guide.

Base class for SimpleEmailService operation requests.

Constants used for properties of type BehaviorOnMXFailure.

Constant RejectMessage for BehaviorOnMXFailure

Constant UseDefaultValue for BehaviorOnMXFailure

This constant constructor does not need to be called if the constant you are attempting to use is already defined as a static instance of this class. This constructor should be used to construct constants that are not defined as statics, for instance if attempting to use a feature that is newer than the current version of the SDK.

Finds the constant for the unique value.

The unique value for the constant The constant for the unique value

Utility method to convert strings to the constant class.

The string value to convert to the constant class.

Constants used for properties of type BounceType.

Constant ContentRejected for BounceType

Constant DoesNotExist for BounceType

Constant ExceededQuota for BounceType

Constant MessageTooLarge for BounceType

Constant TemporaryFailure for BounceType

Constant Undefined for BounceType

Finds the constant for the unique value.

The unique value for the constant The constant for the unique value

Utility method to convert strings to the constant class.

The string value to convert to the constant class.

Constants used for properties of type BulkEmailStatus.

Constant AccountDailyQuotaExceeded for BulkEmailStatus

Constant AccountSendingPaused for BulkEmailStatus

Constant AccountSuspended for BulkEmailStatus

Constant AccountThrottled for BulkEmailStatus

Constant ConfigurationSetDoesNotExist for BulkEmailStatus

Constant ConfigurationSetSendingPaused for BulkEmailStatus

Constant Failed for BulkEmailStatus

Constant InvalidParameterValue for BulkEmailStatus

Constant InvalidSendingPoolName for BulkEmailStatus

Constant MailFromDomainNotVerified for BulkEmailStatus

Constant MessageRejected for BulkEmailStatus

Constant Success for BulkEmailStatus

Constant TemplateDoesNotExist for BulkEmailStatus

Constant TransientFailure for BulkEmailStatus

Finds the constant for the unique value.

The unique value for the constant The constant for the unique value

Utility method to convert strings to the constant class.

The string value to convert to the constant class.

Constants used for properties of type ConfigurationSetAttribute.

Constant EventDestinations for ConfigurationSetAttribute

Constant ReputationOptions for ConfigurationSetAttribute

Constant TrackingOptions for ConfigurationSetAttribute

Finds the constant for the unique value.

The unique value for the constant The constant for the unique value

Utility method to convert strings to the constant class.

The string value to convert to the constant class.

Constants used for properties of type CustomMailFromStatus.

Constant Failed for CustomMailFromStatus

Constant Pending for CustomMailFromStatus

Constant Success for CustomMailFromStatus

Constant TemporaryFailure for CustomMailFromStatus

Finds the constant for the unique value.

The unique value for the constant The constant for the unique value

Utility method to convert strings to the constant class.

The string value to convert to the constant class.

Constants used for properties of type DimensionValueSource.

Constant EmailHeader for DimensionValueSource

Constant LinkTag for DimensionValueSource

Constant MessageTag for DimensionValueSource

Finds the constant for the unique value.

The unique value for the constant The constant for the unique value

Utility method to convert strings to the constant class.

The string value to convert to the constant class.

Constants used for properties of type DsnAction.

Constant Delayed for DsnAction

Constant Delivered for DsnAction

Constant Expanded for DsnAction

Constant Failed for DsnAction

Constant Relayed for DsnAction

Finds the constant for the unique value.

The unique value for the constant The constant for the unique value

Utility method to convert strings to the constant class.

The string value to convert to the constant class.

Constants used for properties of type EventType.

Constant Bounce for EventType

Constant Click for EventType

Constant Complaint for EventType

Constant Delivery for EventType

Constant Open for EventType

Constant Reject for EventType

Constant RenderingFailure for EventType

Constant Send for EventType

Finds the constant for the unique value.

The unique value for the constant The constant for the unique value

Utility method to convert strings to the constant class.

The string value to convert to the constant class.

Constants used for properties of type IdentityType.

Constant Domain for IdentityType

Constant EmailAddress for IdentityType

Finds the constant for the unique value.

The unique value for the constant The constant for the unique value

Utility method to convert strings to the constant class.

The string value to convert to the constant class.

Constants used for properties of type InvocationType.

Constant Event for InvocationType

Constant RequestResponse for InvocationType

Finds the constant for the unique value.

The unique value for the constant The constant for the unique value

Utility method to convert strings to the constant class.

The string value to convert to the constant class.

Constants used for properties of type NotificationType.

Constant Bounce for NotificationType

Constant Complaint for NotificationType

Constant Delivery for NotificationType

Finds the constant for the unique value.

The unique value for the constant The constant for the unique value

Utility method to convert strings to the constant class.

The string value to convert to the constant class.

Constants used for properties of type ReceiptFilterPolicy.

Constant Allow for ReceiptFilterPolicy

Constant Block for ReceiptFilterPolicy

Finds the constant for the unique value.

The unique value for the constant The constant for the unique value

Utility method to convert strings to the constant class.

The string value to convert to the constant class.

Constants used for properties of type SNSActionEncoding.

Constant Base64 for SNSActionEncoding

Constant UTF8 for SNSActionEncoding

Finds the constant for the unique value.

The unique value for the constant The constant for the unique value

Utility method to convert strings to the constant class.

The string value to convert to the constant class.

Constants used for properties of type StopScope.

Constant RuleSet for StopScope

Finds the constant for the unique value.

The unique value for the constant The constant for the unique value

Utility method to convert strings to the constant class.

The string value to convert to the constant class.

Constants used for properties of type TlsPolicy.

Constant Optional for TlsPolicy

Constant Require for TlsPolicy

Finds the constant for the unique value.

The unique value for the constant The constant for the unique value

Utility method to convert strings to the constant class.

The string value to convert to the constant class.

Constants used for properties of type VerificationStatus.

Constant Failed for VerificationStatus

Constant NotStarted for VerificationStatus

Constant Pending for VerificationStatus

Constant Success for VerificationStatus

Constant TemporaryFailure for VerificationStatus

Finds the constant for the unique value.

The unique value for the constant The constant for the unique value

Utility method to convert strings to the constant class.

The string value to convert to the constant class.

Implementation for accessing SimpleEmailService Amazon Simple Email Service This document contains reference information for the Amazon Simple Email Service (Amazon SES) API, version 2010-12-01. This document is best used in conjunction with the Amazon SES Developer Guide. For a list of Amazon SES endpoints to use in service requests, see Regions and Amazon SES in the Amazon SES Developer Guide.

Constructs AmazonSimpleEmailServiceClient with the credentials loaded from the application's default configuration, and if unsuccessful from the Instance Profile service on an EC2 instance. Example App.config with credentials set.


             <?xml version="1.0" encoding="utf-8" ?>
             <configuration>
                 <appSettings>
                     <add key="AWSProfileName" value="AWS Default"/>
                 </appSettings>
             </configuration>


             <?xml version="1.0" encoding="utf-8" ?>
             <configuration>
                 <appSettings>
                     <add key="AWSProfileName" value="AWS Default"/>
                 </appSettings>
             </configuration>

The region to connect.


             <?xml version="1.0" encoding="utf-8" ?>
             <configuration>
                 <appSettings>
                     <add key="AWSProfileName" value="AWS Default"/>
                 </appSettings>
             </configuration>

The AmazonSimpleEmailServiceClient Configuration Object

Constructs AmazonSimpleEmailServiceClient with AWS Credentials

AWS Credentials

Constructs AmazonSimpleEmailServiceClient with AWS Credentials

AWS Credentials The region to connect.

Constructs AmazonSimpleEmailServiceClient with AWS Credentials and an AmazonSimpleEmailServiceClient Configuration object.

AWS Credentials The AmazonSimpleEmailServiceClient Configuration Object

Constructs AmazonSimpleEmailServiceClient with AWS Access Key ID and AWS Secret Key

AWS Access Key ID AWS Secret Access Key

Constructs AmazonSimpleEmailServiceClient with AWS Access Key ID and AWS Secret Key

AWS Access Key ID AWS Secret Access Key The region to connect.

Constructs AmazonSimpleEmailServiceClient with AWS Access Key ID, AWS Secret Key and an AmazonSimpleEmailServiceClient Configuration object.

AWS Access Key ID AWS Secret Access Key The AmazonSimpleEmailServiceClient Configuration Object

Constructs AmazonSimpleEmailServiceClient with AWS Access Key ID and AWS Secret Key

AWS Access Key ID AWS Secret Access Key AWS Session Token

Constructs AmazonSimpleEmailServiceClient with AWS Access Key ID and AWS Secret Key

AWS Access Key ID AWS Secret Access Key AWS Session Token The region to connect.

Constructs AmazonSimpleEmailServiceClient with AWS Access Key ID, AWS Secret Key and an AmazonSimpleEmailServiceClient Configuration object.

AWS Access Key ID AWS Secret Access Key AWS Session Token The AmazonSimpleEmailServiceClient Configuration Object

Creates the signer for the service.

Capture metadata for the service.

Disposes the service client.

Creates a receipt rule set by cloning an existing one. All receipt rules and configurations are copied to the new receipt rule set and are completely independent of the source rule set. For information about setting up rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the CloneReceiptRuleSet service method. The response from the CloneReceiptRuleSet service method, as returned by SimpleEmailService. Indicates that a resource could not be created because of a naming conflict. Indicates that a resource could not be created because of service limits. For a list of Amazon SES limits, see the Amazon SES Developer Guide. Indicates that the provided receipt rule set does not exist. REST API Reference for CloneReceiptRuleSet Operation

Initiates the asynchronous execution of the CloneReceiptRuleSet operation.

Container for the necessary parameters to execute the CloneReceiptRuleSet operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for CloneReceiptRuleSet Operation

Creates a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the CreateConfigurationSet service method. The response from the CreateConfigurationSet service method, as returned by SimpleEmailService. Indicates that the configuration set could not be created because of a naming conflict. Indicates that the configuration set is invalid. See the error message for details. Indicates that a resource could not be created because of service limits. For a list of Amazon SES limits, see the Amazon SES Developer Guide. REST API Reference for CreateConfigurationSet Operation

Initiates the asynchronous execution of the CreateConfigurationSet operation.

Container for the necessary parameters to execute the CreateConfigurationSet operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for CreateConfigurationSet Operation

Creates a configuration set event destination. When you create or update an event destination, you must provide one, and only one, destination. The destination can be CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS). An event destination is the AWS service to which Amazon SES publishes the email sending events associated with a configuration set. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the CreateConfigurationSetEventDestination service method. The response from the CreateConfigurationSetEventDestination service method, as returned by SimpleEmailService. Indicates that the configuration set does not exist. Indicates that the event destination could not be created because of a naming conflict. Indicates that the Amazon CloudWatch destination is invalid. See the error message for details. Indicates that the Amazon Kinesis Firehose destination is invalid. See the error message for details. Indicates that the Amazon Simple Notification Service (Amazon SNS) destination is invalid. See the error message for details. Indicates that a resource could not be created because of service limits. For a list of Amazon SES limits, see the Amazon SES Developer Guide. REST API Reference for CreateConfigurationSetEventDestination Operation

Initiates the asynchronous execution of the CreateConfigurationSetEventDestination operation.

Container for the necessary parameters to execute the CreateConfigurationSetEventDestination operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for CreateConfigurationSetEventDestination Operation

Creates an association between a configuration set and a custom domain for open and click event tracking. By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using custom domains, see the Amazon SES Developer Guide.

Container for the necessary parameters to execute the CreateConfigurationSetTrackingOptions service method. The response from the CreateConfigurationSetTrackingOptions service method, as returned by SimpleEmailService. Indicates that the configuration set does not exist. Indicates that the custom domain to be used for open and click tracking redirects is invalid. This error appears most often in the following situations:

When the tracking domain you specified is not verified in Amazon SES.
When the tracking domain you specified is not a valid domain or subdomain.

Indicates that the configuration set you specified already contains a TrackingOptions object. REST API Reference for CreateConfigurationSetTrackingOptions Operation

Initiates the asynchronous execution of the CreateConfigurationSetTrackingOptions operation.

Container for the necessary parameters to execute the CreateConfigurationSetTrackingOptions operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for CreateConfigurationSetTrackingOptions Operation

Creates a new custom verification email template. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the CreateCustomVerificationEmailTemplate service method. The response from the CreateCustomVerificationEmailTemplate service method, as returned by SimpleEmailService. Indicates that custom verification email template provided content is invalid. Indicates that a custom verification email template with the name you specified already exists. Indicates that the sender address specified for a custom verification email is not verified, and is therefore not eligible to send the custom verification email. Indicates that a resource could not be created because of service limits. For a list of Amazon SES limits, see the Amazon SES Developer Guide. REST API Reference for CreateCustomVerificationEmailTemplate Operation

Initiates the asynchronous execution of the CreateCustomVerificationEmailTemplate operation.

Container for the necessary parameters to execute the CreateCustomVerificationEmailTemplate operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for CreateCustomVerificationEmailTemplate Operation

Creates a new IP address filter. For information about setting up IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the CreateReceiptFilter service method. The response from the CreateReceiptFilter service method, as returned by SimpleEmailService. Indicates that a resource could not be created because of a naming conflict. Indicates that a resource could not be created because of service limits. For a list of Amazon SES limits, see the Amazon SES Developer Guide. REST API Reference for CreateReceiptFilter Operation

Initiates the asynchronous execution of the CreateReceiptFilter operation.

Container for the necessary parameters to execute the CreateReceiptFilter operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for CreateReceiptFilter Operation

Creates a receipt rule. For information about setting up receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the CreateReceiptRule service method. The response from the CreateReceiptRule service method, as returned by SimpleEmailService. Indicates that a resource could not be created because of a naming conflict. Indicates that the provided AWS Lambda function is invalid, or that Amazon SES could not execute the provided function, possibly due to permissions issues. For information about giving permissions, see the Amazon SES Developer Guide. Indicates that the provided Amazon S3 bucket or AWS KMS encryption key is invalid, or that Amazon SES could not publish to the bucket, possibly due to permissions issues. For information about giving permissions, see the Amazon SES Developer Guide. Indicates that the provided Amazon SNS topic is invalid, or that Amazon SES could not publish to the topic, possibly due to permissions issues. For information about giving permissions, see the Amazon SES Developer Guide. Indicates that a resource could not be created because of service limits. For a list of Amazon SES limits, see the Amazon SES Developer Guide. Indicates that the provided receipt rule does not exist. Indicates that the provided receipt rule set does not exist. REST API Reference for CreateReceiptRule Operation

Initiates the asynchronous execution of the CreateReceiptRule operation.

Container for the necessary parameters to execute the CreateReceiptRule operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for CreateReceiptRule Operation

Creates an empty receipt rule set. For information about setting up receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the CreateReceiptRuleSet service method. The response from the CreateReceiptRuleSet service method, as returned by SimpleEmailService. Indicates that a resource could not be created because of a naming conflict. Indicates that a resource could not be created because of service limits. For a list of Amazon SES limits, see the Amazon SES Developer Guide. REST API Reference for CreateReceiptRuleSet Operation

Initiates the asynchronous execution of the CreateReceiptRuleSet operation.

Container for the necessary parameters to execute the CreateReceiptRuleSet operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for CreateReceiptRuleSet Operation

Creates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the CreateTemplate service method. The response from the CreateTemplate service method, as returned by SimpleEmailService. Indicates that a resource could not be created because of a naming conflict. Indicates that the template that you specified could not be rendered. This issue may occur when a template refers to a partial that does not exist. Indicates that a resource could not be created because of service limits. For a list of Amazon SES limits, see the Amazon SES Developer Guide. REST API Reference for CreateTemplate Operation

Initiates the asynchronous execution of the CreateTemplate operation.

Container for the necessary parameters to execute the CreateTemplate operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for CreateTemplate Operation

Deletes a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the DeleteConfigurationSet service method. The response from the DeleteConfigurationSet service method, as returned by SimpleEmailService. Indicates that the configuration set does not exist. REST API Reference for DeleteConfigurationSet Operation

Initiates the asynchronous execution of the DeleteConfigurationSet operation.

Container for the necessary parameters to execute the DeleteConfigurationSet operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for DeleteConfigurationSet Operation

Deletes a configuration set event destination. Configuration set event destinations are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the DeleteConfigurationSetEventDestination service method. The response from the DeleteConfigurationSetEventDestination service method, as returned by SimpleEmailService. Indicates that the configuration set does not exist. Indicates that the event destination does not exist. REST API Reference for DeleteConfigurationSetEventDestination Operation

Initiates the asynchronous execution of the DeleteConfigurationSetEventDestination operation.

Container for the necessary parameters to execute the DeleteConfigurationSetEventDestination operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for DeleteConfigurationSetEventDestination Operation

Deletes an association between a configuration set and a custom domain for open and click event tracking. By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using custom domains, see the Amazon SES Developer Guide. Deleting this kind of association will result in emails sent using the specified configuration set to capture open and click events using the standard, Amazon SES-operated domains.

Container for the necessary parameters to execute the DeleteConfigurationSetTrackingOptions service method. The response from the DeleteConfigurationSetTrackingOptions service method, as returned by SimpleEmailService. Indicates that the configuration set does not exist. Indicates that the TrackingOptions object you specified does not exist. REST API Reference for DeleteConfigurationSetTrackingOptions Operation

Initiates the asynchronous execution of the DeleteConfigurationSetTrackingOptions operation.

Container for the necessary parameters to execute the DeleteConfigurationSetTrackingOptions operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for DeleteConfigurationSetTrackingOptions Operation

Deletes an existing custom verification email template. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the DeleteCustomVerificationEmailTemplate service method. The response from the DeleteCustomVerificationEmailTemplate service method, as returned by SimpleEmailService. REST API Reference for DeleteCustomVerificationEmailTemplate Operation

Initiates the asynchronous execution of the DeleteCustomVerificationEmailTemplate operation.

Container for the necessary parameters to execute the DeleteCustomVerificationEmailTemplate operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for DeleteCustomVerificationEmailTemplate Operation

Deletes the specified identity (an email address or a domain) from the list of verified identities. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the DeleteIdentity service method. The response from the DeleteIdentity service method, as returned by SimpleEmailService. REST API Reference for DeleteIdentity Operation

Initiates the asynchronous execution of the DeleteIdentity operation.

Container for the necessary parameters to execute the DeleteIdentity operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for DeleteIdentity Operation

Deletes the specified sending authorization policy for the given identity (an email address or a domain). This API returns successfully even if a policy with the specified name does not exist. This API is for the identity owner only. If you have not verified the identity, this API will return an error. Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the DeleteIdentityPolicy service method. The response from the DeleteIdentityPolicy service method, as returned by SimpleEmailService. REST API Reference for DeleteIdentityPolicy Operation

Initiates the asynchronous execution of the DeleteIdentityPolicy operation.

Container for the necessary parameters to execute the DeleteIdentityPolicy operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for DeleteIdentityPolicy Operation

Deletes the specified IP address filter. For information about managing IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the DeleteReceiptFilter service method. The response from the DeleteReceiptFilter service method, as returned by SimpleEmailService. REST API Reference for DeleteReceiptFilter Operation

Initiates the asynchronous execution of the DeleteReceiptFilter operation.

Container for the necessary parameters to execute the DeleteReceiptFilter operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for DeleteReceiptFilter Operation

Deletes the specified receipt rule. For information about managing receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the DeleteReceiptRule service method. The response from the DeleteReceiptRule service method, as returned by SimpleEmailService. Indicates that the provided receipt rule set does not exist. REST API Reference for DeleteReceiptRule Operation

Initiates the asynchronous execution of the DeleteReceiptRule operation.

Container for the necessary parameters to execute the DeleteReceiptRule operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for DeleteReceiptRule Operation

Deletes the specified receipt rule set and all of the receipt rules it contains. The currently active rule set cannot be deleted. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the DeleteReceiptRuleSet service method. The response from the DeleteReceiptRuleSet service method, as returned by SimpleEmailService. Indicates that the delete operation could not be completed. REST API Reference for DeleteReceiptRuleSet Operation

Initiates the asynchronous execution of the DeleteReceiptRuleSet operation.

Container for the necessary parameters to execute the DeleteReceiptRuleSet operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for DeleteReceiptRuleSet Operation

Deletes an email template. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the DeleteTemplate service method. The response from the DeleteTemplate service method, as returned by SimpleEmailService. REST API Reference for DeleteTemplate Operation

Initiates the asynchronous execution of the DeleteTemplate operation.

Container for the necessary parameters to execute the DeleteTemplate operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for DeleteTemplate Operation

Deprecated. Use the DeleteIdentity operation to delete email addresses and domains.

Container for the necessary parameters to execute the DeleteVerifiedEmailAddress service method. The response from the DeleteVerifiedEmailAddress service method, as returned by SimpleEmailService. REST API Reference for DeleteVerifiedEmailAddress Operation

Initiates the asynchronous execution of the DeleteVerifiedEmailAddress operation.

Container for the necessary parameters to execute the DeleteVerifiedEmailAddress operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for DeleteVerifiedEmailAddress Operation

Returns the metadata and receipt rules for the receipt rule set that is currently active. For information about setting up receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the DescribeActiveReceiptRuleSet service method. The response from the DescribeActiveReceiptRuleSet service method, as returned by SimpleEmailService. REST API Reference for DescribeActiveReceiptRuleSet Operation

Initiates the asynchronous execution of the DescribeActiveReceiptRuleSet operation.

Container for the necessary parameters to execute the DescribeActiveReceiptRuleSet operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for DescribeActiveReceiptRuleSet Operation

Returns the details of the specified configuration set. For information about using configuration sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the DescribeConfigurationSet service method. The response from the DescribeConfigurationSet service method, as returned by SimpleEmailService. Indicates that the configuration set does not exist. REST API Reference for DescribeConfigurationSet Operation

Initiates the asynchronous execution of the DescribeConfigurationSet operation.

Container for the necessary parameters to execute the DescribeConfigurationSet operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for DescribeConfigurationSet Operation

Returns the details of the specified receipt rule. For information about setting up receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the DescribeReceiptRule service method. The response from the DescribeReceiptRule service method, as returned by SimpleEmailService. Indicates that the provided receipt rule does not exist. Indicates that the provided receipt rule set does not exist. REST API Reference for DescribeReceiptRule Operation

Initiates the asynchronous execution of the DescribeReceiptRule operation.

Container for the necessary parameters to execute the DescribeReceiptRule operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for DescribeReceiptRule Operation

Returns the details of the specified receipt rule set. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the DescribeReceiptRuleSet service method. The response from the DescribeReceiptRuleSet service method, as returned by SimpleEmailService. Indicates that the provided receipt rule set does not exist. REST API Reference for DescribeReceiptRuleSet Operation

Initiates the asynchronous execution of the DescribeReceiptRuleSet operation.

Container for the necessary parameters to execute the DescribeReceiptRuleSet operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for DescribeReceiptRuleSet Operation

Returns the email sending status of the Amazon SES account for the current region. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the GetAccountSendingEnabled service method. The response from the GetAccountSendingEnabled service method, as returned by SimpleEmailService. REST API Reference for GetAccountSendingEnabled Operation

Initiates the asynchronous execution of the GetAccountSendingEnabled operation.

Container for the necessary parameters to execute the GetAccountSendingEnabled operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for GetAccountSendingEnabled Operation

Returns the custom email verification template for the template name you specify. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the GetCustomVerificationEmailTemplate service method. The response from the GetCustomVerificationEmailTemplate service method, as returned by SimpleEmailService. Indicates that a custom verification email template with the name you specified does not exist. REST API Reference for GetCustomVerificationEmailTemplate Operation

Initiates the asynchronous execution of the GetCustomVerificationEmailTemplate operation.

Container for the necessary parameters to execute the GetCustomVerificationEmailTemplate operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for GetCustomVerificationEmailTemplate Operation

Returns the current status of Easy DKIM signing for an entity. For domain name identities, this operation also returns the DKIM tokens that are required for Easy DKIM signing, and whether Amazon SES has successfully verified that these tokens have been published. This operation takes a list of identities as input and returns the following information for each:

Whether Easy DKIM signing is enabled or disabled.
A set of DKIM tokens that represent the identity. If the identity is an email address, the tokens represent the domain of that address.
Whether Amazon SES has successfully verified the DKIM tokens published in the domain's DNS. This information is only returned for domain name identities, not for email addresses.

Container for the necessary parameters to execute the GetIdentityDkimAttributes service method. The response from the GetIdentityDkimAttributes service method, as returned by SimpleEmailService. REST API Reference for GetIdentityDkimAttributes Operation

Initiates the asynchronous execution of the GetIdentityDkimAttributes operation.

Container for the necessary parameters to execute the GetIdentityDkimAttributes operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for GetIdentityDkimAttributes Operation

Returns the custom MAIL FROM attributes for a list of identities (email addresses : domains). This operation is throttled at one request per second and can only get custom MAIL FROM attributes for up to 100 identities at a time.

Container for the necessary parameters to execute the GetIdentityMailFromDomainAttributes service method. The response from the GetIdentityMailFromDomainAttributes service method, as returned by SimpleEmailService. REST API Reference for GetIdentityMailFromDomainAttributes Operation

Initiates the asynchronous execution of the GetIdentityMailFromDomainAttributes operation.

Container for the necessary parameters to execute the GetIdentityMailFromDomainAttributes operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for GetIdentityMailFromDomainAttributes Operation

Given a list of verified identities (email addresses and/or domains), returns a structure describing identity notification attributes. This operation is throttled at one request per second and can only get notification attributes for up to 100 identities at a time. For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.

Container for the necessary parameters to execute the GetIdentityNotificationAttributes service method. The response from the GetIdentityNotificationAttributes service method, as returned by SimpleEmailService. REST API Reference for GetIdentityNotificationAttributes Operation

Initiates the asynchronous execution of the GetIdentityNotificationAttributes operation.

Container for the necessary parameters to execute the GetIdentityNotificationAttributes operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for GetIdentityNotificationAttributes Operation

Returns the requested sending authorization policies for the given identity (an email address or a domain). The policies are returned as a map of policy names to policy contents. You can retrieve a maximum of 20 policies at a time. This API is for the identity owner only. If you have not verified the identity, this API will return an error. Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the GetIdentityPolicies service method. The response from the GetIdentityPolicies service method, as returned by SimpleEmailService. REST API Reference for GetIdentityPolicies Operation

Initiates the asynchronous execution of the GetIdentityPolicies operation.

Container for the necessary parameters to execute the GetIdentityPolicies operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for GetIdentityPolicies Operation

Given a list of identities (email addresses and/or domains), returns the verification status and (for domain identities) the verification token for each identity. The verification status of an email address is "Pending" until the email address owner clicks the link within the verification email that Amazon SES sent to that address. If the email address owner clicks the link within 24 hours, the verification status of the email address changes to "Success". If the link is not clicked within 24 hours, the verification status changes to "Failed." In that case, if you still want to verify the email address, you must restart the verification process from the beginning. For domain identities, the domain's verification status is "Pending" as Amazon SES searches for the required TXT record in the DNS settings of the domain. When Amazon SES detects the record, the domain's verification status changes to "Success". If Amazon SES is unable to detect the record within 72 hours, the domain's verification status changes to "Failed." In that case, if you still want to verify the domain, you must restart the verification process from the beginning. This operation is throttled at one request per second and can only get verification attributes for up to 100 identities at a time.

Container for the necessary parameters to execute the GetIdentityVerificationAttributes service method. The response from the GetIdentityVerificationAttributes service method, as returned by SimpleEmailService. REST API Reference for GetIdentityVerificationAttributes Operation

Initiates the asynchronous execution of the GetIdentityVerificationAttributes operation.

Container for the necessary parameters to execute the GetIdentityVerificationAttributes operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for GetIdentityVerificationAttributes Operation

Provides the sending limits for the Amazon SES account. You can execute this operation no more than once per second.

The response from the GetSendQuota service method, as returned by SimpleEmailService. REST API Reference for GetSendQuota Operation

Provides the sending limits for the Amazon SES account. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the GetSendQuota service method. The response from the GetSendQuota service method, as returned by SimpleEmailService. REST API Reference for GetSendQuota Operation

Provides the sending limits for the Amazon SES account. You can execute this operation no more than once per second.

A cancellation token that can be used by other objects or threads to receive notice of cancellation. The response from the GetSendQuota service method, as returned by SimpleEmailService. REST API Reference for GetSendQuota Operation

Initiates the asynchronous execution of the GetSendQuota operation.

Container for the necessary parameters to execute the GetSendQuota operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for GetSendQuota Operation

Provides sending statistics for the current AWS Region. The result is a list of data points, representing the last two weeks of sending activity. Each data point in the list contains statistics for a 15-minute period of time. You can execute this operation no more than once per second.

The response from the GetSendStatistics service method, as returned by SimpleEmailService. REST API Reference for GetSendStatistics Operation

Container for the necessary parameters to execute the GetSendStatistics service method. The response from the GetSendStatistics service method, as returned by SimpleEmailService. REST API Reference for GetSendStatistics Operation

A cancellation token that can be used by other objects or threads to receive notice of cancellation. The response from the GetSendStatistics service method, as returned by SimpleEmailService. REST API Reference for GetSendStatistics Operation

Initiates the asynchronous execution of the GetSendStatistics operation.

Container for the necessary parameters to execute the GetSendStatistics operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for GetSendStatistics Operation

Displays the template object (which includes the Subject line, HTML part and text part) for the template you specify. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the GetTemplate service method. The response from the GetTemplate service method, as returned by SimpleEmailService. Indicates that the Template object you specified does not exist in your Amazon SES account. REST API Reference for GetTemplate Operation

Initiates the asynchronous execution of the GetTemplate operation.

Container for the necessary parameters to execute the GetTemplate operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for GetTemplate Operation

Provides a list of the configuration sets associated with your Amazon SES account in the current AWS Region. For information about using configuration sets, see Monitoring Your Amazon SES Sending Activity in the Amazon SES Developer Guide. You can execute this operation no more than once per second. This operation will return up to 1,000 configuration sets each time it is run. If your Amazon SES account has more than 1,000 configuration sets, this operation will also return a NextToken element. You can then execute the ListConfigurationSets operation again, passing the NextToken parameter and the value of the NextToken element to retrieve additional results.

Container for the necessary parameters to execute the ListConfigurationSets service method. The response from the ListConfigurationSets service method, as returned by SimpleEmailService. REST API Reference for ListConfigurationSets Operation

Initiates the asynchronous execution of the ListConfigurationSets operation.

Container for the necessary parameters to execute the ListConfigurationSets operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for ListConfigurationSets Operation

Lists the existing custom verification email templates for your account in the current AWS Region. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the ListCustomVerificationEmailTemplates service method. The response from the ListCustomVerificationEmailTemplates service method, as returned by SimpleEmailService. REST API Reference for ListCustomVerificationEmailTemplates Operation

Initiates the asynchronous execution of the ListCustomVerificationEmailTemplates operation.

Container for the necessary parameters to execute the ListCustomVerificationEmailTemplates operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for ListCustomVerificationEmailTemplates Operation

Returns a list containing all of the identities (email addresses and domains) for your AWS account in the current AWS Region, regardless of verification status. You can execute this operation no more than once per second.

The response from the ListIdentities service method, as returned by SimpleEmailService. REST API Reference for ListIdentities Operation

Container for the necessary parameters to execute the ListIdentities service method. The response from the ListIdentities service method, as returned by SimpleEmailService. REST API Reference for ListIdentities Operation

A cancellation token that can be used by other objects or threads to receive notice of cancellation. The response from the ListIdentities service method, as returned by SimpleEmailService. REST API Reference for ListIdentities Operation

Initiates the asynchronous execution of the ListIdentities operation.

Container for the necessary parameters to execute the ListIdentities operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for ListIdentities Operation

Returns a list of sending authorization policies that are attached to the given identity (an email address or a domain). This API returns only a list. If you want the actual policy content, you can use GetIdentityPolicies. This API is for the identity owner only. If you have not verified the identity, this API will return an error. Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the ListIdentityPolicies service method. The response from the ListIdentityPolicies service method, as returned by SimpleEmailService. REST API Reference for ListIdentityPolicies Operation

Initiates the asynchronous execution of the ListIdentityPolicies operation.

Container for the necessary parameters to execute the ListIdentityPolicies operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for ListIdentityPolicies Operation

Lists the IP address filters associated with your AWS account in the current AWS Region. For information about managing IP address filters, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the ListReceiptFilters service method. The response from the ListReceiptFilters service method, as returned by SimpleEmailService. REST API Reference for ListReceiptFilters Operation

Initiates the asynchronous execution of the ListReceiptFilters operation.

Container for the necessary parameters to execute the ListReceiptFilters operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for ListReceiptFilters Operation

Lists the receipt rule sets that exist under your AWS account in the current AWS Region. If there are additional receipt rule sets to be retrieved, you will receive a NextToken that you can provide to the next call to ListReceiptRuleSets to retrieve the additional entries. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the ListReceiptRuleSets service method. The response from the ListReceiptRuleSets service method, as returned by SimpleEmailService. REST API Reference for ListReceiptRuleSets Operation

Initiates the asynchronous execution of the ListReceiptRuleSets operation.

Container for the necessary parameters to execute the ListReceiptRuleSets operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for ListReceiptRuleSets Operation

Lists the email templates present in your Amazon SES account in the current AWS Region. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the ListTemplates service method. The response from the ListTemplates service method, as returned by SimpleEmailService. REST API Reference for ListTemplates Operation

Initiates the asynchronous execution of the ListTemplates operation.

Container for the necessary parameters to execute the ListTemplates operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for ListTemplates Operation

Deprecated. Use the ListIdentities operation to list the email addresses and domains associated with your account.

The response from the ListVerifiedEmailAddresses service method, as returned by SimpleEmailService. REST API Reference for ListVerifiedEmailAddresses Operation

Deprecated. Use the ListIdentities operation to list the email addresses and domains associated with your account.

Container for the necessary parameters to execute the ListVerifiedEmailAddresses service method. The response from the ListVerifiedEmailAddresses service method, as returned by SimpleEmailService. REST API Reference for ListVerifiedEmailAddresses Operation

Deprecated. Use the ListIdentities operation to list the email addresses and domains associated with your account.

A cancellation token that can be used by other objects or threads to receive notice of cancellation. The response from the ListVerifiedEmailAddresses service method, as returned by SimpleEmailService. REST API Reference for ListVerifiedEmailAddresses Operation

Initiates the asynchronous execution of the ListVerifiedEmailAddresses operation.

Container for the necessary parameters to execute the ListVerifiedEmailAddresses operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for ListVerifiedEmailAddresses Operation

Adds or updates a sending authorization policy for the specified identity (an email address or a domain). This API is for the identity owner only. If you have not verified the identity, this API will return an error. Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the PutIdentityPolicy service method. The response from the PutIdentityPolicy service method, as returned by SimpleEmailService. Indicates that the provided policy is invalid. Check the error stack for more information about what caused the error. REST API Reference for PutIdentityPolicy Operation

Initiates the asynchronous execution of the PutIdentityPolicy operation.

Container for the necessary parameters to execute the PutIdentityPolicy operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for PutIdentityPolicy Operation

Reorders the receipt rules within a receipt rule set. All of the rules in the rule set must be represented in this request. That is, this API will return an error if the reorder request doesn't explicitly position all of the rules. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the ReorderReceiptRuleSet service method. The response from the ReorderReceiptRuleSet service method, as returned by SimpleEmailService. Indicates that the provided receipt rule does not exist. Indicates that the provided receipt rule set does not exist. REST API Reference for ReorderReceiptRuleSet Operation

Initiates the asynchronous execution of the ReorderReceiptRuleSet operation.

Container for the necessary parameters to execute the ReorderReceiptRuleSet operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for ReorderReceiptRuleSet Operation

Generates and sends a bounce message to the sender of an email you received through Amazon SES. You can only use this API on an email up to 24 hours after you receive it. You cannot use this API to send generic bounces for mail that was not received by Amazon SES. For information about receiving email through Amazon SES, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the SendBounce service method. The response from the SendBounce service method, as returned by SimpleEmailService. Indicates that the action failed, and the message could not be sent. Check the error stack for more information about what caused the error. REST API Reference for SendBounce Operation

Initiates the asynchronous execution of the SendBounce operation.

Container for the necessary parameters to execute the SendBounce operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for SendBounce Operation

Composes an email message to multiple destinations. The message body is created using an email template. In order to send email using the SendBulkTemplatedEmail operation, your call to the API must meet the following requirements:

The call must refer to an existing email template. You can create email templates using the CreateTemplate operation.
The message must be sent from a verified email address or domain.
If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.
The maximum message size is 10 MB.
Each Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.
The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendBulkTemplatedEmail operation several times to send the message to each group.
The number of destinations you can contact in a single call to the API may be limited by your account's maximum sending rate.

Container for the necessary parameters to execute the SendBulkTemplatedEmail service method. The response from the SendBulkTemplatedEmail service method, as returned by SimpleEmailService. Indicates that email sending is disabled for your entire Amazon SES account. You can enable or disable email sending for your Amazon SES account using UpdateAccountSendingEnabled. Indicates that the configuration set does not exist. Indicates that email sending is disabled for the configuration set. You can enable or disable email sending for a configuration set using UpdateConfigurationSetSendingEnabled. Indicates that the message could not be sent because Amazon SES could not read the MX record required to use the specified MAIL FROM domain. For information about editing the custom MAIL FROM domain settings for an identity, see the Amazon SES Developer Guide. Indicates that the action failed, and the message could not be sent. Check the error stack for more information about what caused the error. Indicates that the Template object you specified does not exist in your Amazon SES account. REST API Reference for SendBulkTemplatedEmail Operation

Initiates the asynchronous execution of the SendBulkTemplatedEmail operation.

Container for the necessary parameters to execute the SendBulkTemplatedEmail operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for SendBulkTemplatedEmail Operation

Adds an email address to the list of identities for your Amazon SES account in the current AWS Region and attempts to verify it. As a result of executing this operation, a customized verification email is sent to the specified address. To use this operation, you must first create a custom verification email template. For more information about creating and using custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the SendCustomVerificationEmail service method. The response from the SendCustomVerificationEmail service method, as returned by SimpleEmailService. Indicates that the configuration set does not exist. Indicates that a custom verification email template with the name you specified does not exist. Indicates that the sender address specified for a custom verification email is not verified, and is therefore not eligible to send the custom verification email. Indicates that the action failed, and the message could not be sent. Check the error stack for more information about what caused the error. Indicates that the account has not been granted production access. REST API Reference for SendCustomVerificationEmail Operation

Initiates the asynchronous execution of the SendCustomVerificationEmail operation.

Container for the necessary parameters to execute the SendCustomVerificationEmail operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for SendCustomVerificationEmail Operation

Composes an email message and immediately queues it for sending. In order to send email using the SendEmail operation, your message must meet the following requirements:

The message must be sent from a verified email address or domain. If you attempt to send email using a non-verified address or domain, the operation will result in an "Email address not verified" error.
If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.
The maximum message size is 10 MB.
The message must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.
The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendEmail operation several times to send the message to each group.

Container for the necessary parameters to execute the SendEmail service method. The response from the SendEmail service method, as returned by SimpleEmailService. Indicates that email sending is disabled for your entire Amazon SES account. You can enable or disable email sending for your Amazon SES account using UpdateAccountSendingEnabled. Indicates that the configuration set does not exist. Indicates that email sending is disabled for the configuration set. You can enable or disable email sending for a configuration set using UpdateConfigurationSetSendingEnabled. Indicates that the message could not be sent because Amazon SES could not read the MX record required to use the specified MAIL FROM domain. For information about editing the custom MAIL FROM domain settings for an identity, see the Amazon SES Developer Guide. Indicates that the action failed, and the message could not be sent. Check the error stack for more information about what caused the error. REST API Reference for SendEmail Operation

Initiates the asynchronous execution of the SendEmail operation.

Container for the necessary parameters to execute the SendEmail operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for SendEmail Operation

Composes an email message and immediately queues it for sending. This operation is more flexible than the SendEmail API operation. When you use the SendRawEmail operation, you can specify the headers of the message as well as its content. This flexibility is useful, for example, when you want to send a multipart MIME email (such a message that contains both a text and an HTML version). You can also use this operation to send messages that include attachments. The SendRawEmail operation has the following requirements:

You can only send email from verified email addresses or domains. If you try to send email from an address that isn't verified, the operation results in an "Email address not verified" error.
If your account is still in the Amazon SES sandbox, you can only send email to other verified addresses in your account, or to addresses that are associated with the Amazon SES mailbox simulator.
The maximum message size, including attachments, is 10 MB.
Each message has to include at least one recipient address. A recipient address includes any address on the To:, CC:, or BCC: lines.
If you send a single message to more than one recipient address, and one of the recipient addresses isn't in a valid format (that is, it's not in the format UserName@[SubDomain.]Domain.TopLevelDomain), Amazon SES rejects the entire message, even if the other addresses are valid.
Each message can include up to 50 recipient addresses across the To:, CC:, or BCC: lines. If you need to send a single message to more than 50 recipients, you have to split the list of recipient addresses into groups of less than 50 recipients, and send separate messages to each group.
Amazon SES allows you to specify 8-bit Content-Transfer-Encoding for MIME message parts. However, if Amazon SES has to modify the contents of your message (for example, if you use open and click tracking), 8-bit content isn't preserved. For this reason, we highly recommend that you encode all content that isn't 7-bit ASCII. For more information, see MIME Encoding in the Amazon SES Developer Guide.

Additionally, keep the following considerations in mind when using the SendRawEmail operation:

Although you can customize the message headers when using the SendRawEmail operation, Amazon SES will automatically apply its own Message-ID and Date headers; if you passed these headers when creating the message, they will be overwritten by the values that Amazon SES provides.
If you are using sending authorization to send on behalf of another user, SendRawEmail enables you to specify the cross-account identity for the email's Source, From, and Return-Path parameters in one of two ways: you can pass optional parameters SourceArn, FromArn, and/or ReturnPathArn to the API, or you can include the following X-headers in the header of your raw email:
- X-SES-SOURCE-ARN
- X-SES-FROM-ARN
- X-SES-RETURN-PATH-ARN
Do not include these X-headers in the DKIM signature; Amazon SES will remove them before sending the email. For most common sending authorization scenarios, we recommend that you specify the SourceIdentityArn parameter and not the FromIdentityArn or ReturnPathIdentityArn parameters. If you only specify the SourceIdentityArn parameter, Amazon SES will set the From and Return Path addresses to the identity specified in SourceIdentityArn. For more information about sending authorization, see the Using Sending Authorization with Amazon SES in the Amazon SES Developer Guide.
For every message that you send, the total number of recipients (including each recipient in the To:, CC: and BCC: fields) is counted against the maximum number of emails you can send in a 24-hour period (your sending quota). For more information about sending quotas in Amazon SES, see Managing Your Amazon SES Sending Limits in the Amazon SES Developer Guide.

Container for the necessary parameters to execute the SendRawEmail service method. The response from the SendRawEmail service method, as returned by SimpleEmailService. Indicates that email sending is disabled for your entire Amazon SES account. You can enable or disable email sending for your Amazon SES account using UpdateAccountSendingEnabled. Indicates that the configuration set does not exist. Indicates that email sending is disabled for the configuration set. You can enable or disable email sending for a configuration set using UpdateConfigurationSetSendingEnabled. Indicates that the message could not be sent because Amazon SES could not read the MX record required to use the specified MAIL FROM domain. For information about editing the custom MAIL FROM domain settings for an identity, see the Amazon SES Developer Guide. Indicates that the action failed, and the message could not be sent. Check the error stack for more information about what caused the error. REST API Reference for SendRawEmail Operation

Initiates the asynchronous execution of the SendRawEmail operation.

Container for the necessary parameters to execute the SendRawEmail operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for SendRawEmail Operation

Composes an email message using an email template and immediately queues it for sending. In order to send email using the SendTemplatedEmail operation, your call to the API must meet the following requirements:

The call must refer to an existing email template. You can create email templates using the CreateTemplate operation.
The message must be sent from a verified email address or domain.
If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide.
The maximum message size is 10 MB.
Calls to the SendTemplatedEmail operation may only include one Destination parameter. A destination is a set of recipients who will receive the same version of the email. The Destination parameter can include up to 50 recipients, across the To:, CC: and BCC: fields.
The Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be rejected, even if the message contains other recipients that are valid.

Container for the necessary parameters to execute the SendTemplatedEmail service method. The response from the SendTemplatedEmail service method, as returned by SimpleEmailService. Indicates that email sending is disabled for your entire Amazon SES account. You can enable or disable email sending for your Amazon SES account using UpdateAccountSendingEnabled. Indicates that the configuration set does not exist. Indicates that email sending is disabled for the configuration set. You can enable or disable email sending for a configuration set using UpdateConfigurationSetSendingEnabled. Indicates that the message could not be sent because Amazon SES could not read the MX record required to use the specified MAIL FROM domain. For information about editing the custom MAIL FROM domain settings for an identity, see the Amazon SES Developer Guide. Indicates that the action failed, and the message could not be sent. Check the error stack for more information about what caused the error. Indicates that the Template object you specified does not exist in your Amazon SES account. REST API Reference for SendTemplatedEmail Operation

Initiates the asynchronous execution of the SendTemplatedEmail operation.

Container for the necessary parameters to execute the SendTemplatedEmail operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for SendTemplatedEmail Operation

Sets the specified receipt rule set as the active receipt rule set. To disable your email-receiving through Amazon SES completely, you can call this API with RuleSetName set to null. For information about managing receipt rule sets, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the SetActiveReceiptRuleSet service method. The response from the SetActiveReceiptRuleSet service method, as returned by SimpleEmailService. Indicates that the provided receipt rule set does not exist. REST API Reference for SetActiveReceiptRuleSet Operation

Initiates the asynchronous execution of the SetActiveReceiptRuleSet operation.

Container for the necessary parameters to execute the SetActiveReceiptRuleSet operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for SetActiveReceiptRuleSet Operation

Enables or disables Easy DKIM signing of email sent from an identity:

If Easy DKIM signing is enabled for a domain name identity (such as example.com), then Amazon SES will DKIM-sign all email sent by addresses under that domain name (for example, user@example.com).
If Easy DKIM signing is enabled for an email address, then Amazon SES will DKIM-sign all email sent by that email address.

Container for the necessary parameters to execute the SetIdentityDkimEnabled service method. The response from the SetIdentityDkimEnabled service method, as returned by SimpleEmailService. REST API Reference for SetIdentityDkimEnabled Operation

Initiates the asynchronous execution of the SetIdentityDkimEnabled operation.

Container for the necessary parameters to execute the SetIdentityDkimEnabled operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for SetIdentityDkimEnabled Operation

Given an identity (an email address or a domain), enables or disables whether Amazon SES forwards bounce and complaint notifications as email. Feedback forwarding can only be disabled when Amazon Simple Notification Service (Amazon SNS) topics are specified for both bounces and complaints. Feedback forwarding does not apply to delivery notifications. Delivery notifications are only available through Amazon SNS. You can execute this operation no more than once per second. For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.

Container for the necessary parameters to execute the SetIdentityFeedbackForwardingEnabled service method. The response from the SetIdentityFeedbackForwardingEnabled service method, as returned by SimpleEmailService. REST API Reference for SetIdentityFeedbackForwardingEnabled Operation

Initiates the asynchronous execution of the SetIdentityFeedbackForwardingEnabled operation.

Container for the necessary parameters to execute the SetIdentityFeedbackForwardingEnabled operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for SetIdentityFeedbackForwardingEnabled Operation

Given an identity (an email address or a domain), sets whether Amazon SES includes the original email headers in the Amazon Simple Notification Service (Amazon SNS) notifications of a specified type. You can execute this operation no more than once per second. For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.

Container for the necessary parameters to execute the SetIdentityHeadersInNotificationsEnabled service method. The response from the SetIdentityHeadersInNotificationsEnabled service method, as returned by SimpleEmailService. REST API Reference for SetIdentityHeadersInNotificationsEnabled Operation

Initiates the asynchronous execution of the SetIdentityHeadersInNotificationsEnabled operation.

Container for the necessary parameters to execute the SetIdentityHeadersInNotificationsEnabled operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for SetIdentityHeadersInNotificationsEnabled Operation

Enables or disables the custom MAIL FROM domain setup for a verified identity (an email address or a domain). To send emails using the specified MAIL FROM domain, you must add an MX record to your MAIL FROM domain's DNS settings. If you want your emails to pass Sender Policy Framework (SPF) checks, you must also add or update an SPF record. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the SetIdentityMailFromDomain service method. The response from the SetIdentityMailFromDomain service method, as returned by SimpleEmailService. REST API Reference for SetIdentityMailFromDomain Operation

Initiates the asynchronous execution of the SetIdentityMailFromDomain operation.

Container for the necessary parameters to execute the SetIdentityMailFromDomain operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for SetIdentityMailFromDomain Operation

Sets an Amazon Simple Notification Service (Amazon SNS) topic to use when delivering notifications. When you use this operation, you specify a verified identity, such as an email address or domain. When you send an email that uses the chosen identity in the Source field, Amazon SES sends notifications to the topic you specified. You can send bounce, complaint, or delivery notifications (or any combination of the three) to the Amazon SNS topic that you specify. You can execute this operation no more than once per second. For more information about feedback notification, see the Amazon SES Developer Guide.

Container for the necessary parameters to execute the SetIdentityNotificationTopic service method. The response from the SetIdentityNotificationTopic service method, as returned by SimpleEmailService. REST API Reference for SetIdentityNotificationTopic Operation

Initiates the asynchronous execution of the SetIdentityNotificationTopic operation.

Container for the necessary parameters to execute the SetIdentityNotificationTopic operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for SetIdentityNotificationTopic Operation

Sets the position of the specified receipt rule in the receipt rule set. For information about managing receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the SetReceiptRulePosition service method. The response from the SetReceiptRulePosition service method, as returned by SimpleEmailService. Indicates that the provided receipt rule does not exist. Indicates that the provided receipt rule set does not exist. REST API Reference for SetReceiptRulePosition Operation

Initiates the asynchronous execution of the SetReceiptRulePosition operation.

Container for the necessary parameters to execute the SetReceiptRulePosition operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for SetReceiptRulePosition Operation

Creates a preview of the MIME content of an email when provided with a template and a set of replacement data. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the TestRenderTemplate service method. The response from the TestRenderTemplate service method, as returned by SimpleEmailService. Indicates that one or more of the replacement values you provided is invalid. This error may occur when the TemplateData object contains invalid JSON. Indicates that one or more of the replacement values for the specified template was not specified. Ensure that the TemplateData object contains references to all of the replacement tags in the specified template. Indicates that the Template object you specified does not exist in your Amazon SES account. REST API Reference for TestRenderTemplate Operation

Initiates the asynchronous execution of the TestRenderTemplate operation.

Container for the necessary parameters to execute the TestRenderTemplate operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for TestRenderTemplate Operation

Enables or disables email sending across your entire Amazon SES account in the current AWS Region. You can use this operation in conjunction with Amazon CloudWatch alarms to temporarily pause email sending across your Amazon SES account in a given AWS Region when reputation metrics (such as your bounce or complaint rates) reach certain thresholds. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the UpdateAccountSendingEnabled service method. The response from the UpdateAccountSendingEnabled service method, as returned by SimpleEmailService. REST API Reference for UpdateAccountSendingEnabled Operation

Initiates the asynchronous execution of the UpdateAccountSendingEnabled operation.

Container for the necessary parameters to execute the UpdateAccountSendingEnabled operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for UpdateAccountSendingEnabled Operation

Updates the event destination of a configuration set. Event destinations are associated with configuration sets, which enable you to publish email sending events to Amazon CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS). For information about using configuration sets, see Monitoring Your Amazon SES Sending Activity in the Amazon SES Developer Guide. When you create or update an event destination, you must provide one, and only one, destination. The destination can be Amazon CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS). You can execute this operation no more than once per second.

Container for the necessary parameters to execute the UpdateConfigurationSetEventDestination service method. The response from the UpdateConfigurationSetEventDestination service method, as returned by SimpleEmailService. Indicates that the configuration set does not exist. Indicates that the event destination does not exist. Indicates that the Amazon CloudWatch destination is invalid. See the error message for details. Indicates that the Amazon Kinesis Firehose destination is invalid. See the error message for details. Indicates that the Amazon Simple Notification Service (Amazon SNS) destination is invalid. See the error message for details. REST API Reference for UpdateConfigurationSetEventDestination Operation

Initiates the asynchronous execution of the UpdateConfigurationSetEventDestination operation.

Container for the necessary parameters to execute the UpdateConfigurationSetEventDestination operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for UpdateConfigurationSetEventDestination Operation

Enables or disables the publishing of reputation metrics for emails sent using a specific configuration set in a given AWS Region. Reputation metrics include bounce and complaint rates. These metrics are published to Amazon CloudWatch. By using CloudWatch, you can create alarms when bounce or complaint rates exceed certain thresholds. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the UpdateConfigurationSetReputationMetricsEnabled service method. The response from the UpdateConfigurationSetReputationMetricsEnabled service method, as returned by SimpleEmailService. Indicates that the configuration set does not exist. REST API Reference for UpdateConfigurationSetReputationMetricsEnabled Operation

Initiates the asynchronous execution of the UpdateConfigurationSetReputationMetricsEnabled operation.

Container for the necessary parameters to execute the UpdateConfigurationSetReputationMetricsEnabled operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for UpdateConfigurationSetReputationMetricsEnabled Operation

Enables or disables email sending for messages sent using a specific configuration set in a given AWS Region. You can use this operation in conjunction with Amazon CloudWatch alarms to temporarily pause email sending for a configuration set when the reputation metrics for that configuration set (such as your bounce on complaint rate) exceed certain thresholds. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the UpdateConfigurationSetSendingEnabled service method. The response from the UpdateConfigurationSetSendingEnabled service method, as returned by SimpleEmailService. Indicates that the configuration set does not exist. REST API Reference for UpdateConfigurationSetSendingEnabled Operation

Initiates the asynchronous execution of the UpdateConfigurationSetSendingEnabled operation.

Container for the necessary parameters to execute the UpdateConfigurationSetSendingEnabled operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for UpdateConfigurationSetSendingEnabled Operation

Modifies an association between a configuration set and a custom domain for open and click event tracking. By default, images and links used for tracking open and click events are hosted on domains operated by Amazon SES. You can configure a subdomain of your own to handle these events. For information about using custom domains, see the Amazon SES Developer Guide.

Container for the necessary parameters to execute the UpdateConfigurationSetTrackingOptions service method. The response from the UpdateConfigurationSetTrackingOptions service method, as returned by SimpleEmailService. Indicates that the configuration set does not exist. Indicates that the custom domain to be used for open and click tracking redirects is invalid. This error appears most often in the following situations:

When the tracking domain you specified is not verified in Amazon SES.
When the tracking domain you specified is not a valid domain or subdomain.

Indicates that the TrackingOptions object you specified does not exist. REST API Reference for UpdateConfigurationSetTrackingOptions Operation

Initiates the asynchronous execution of the UpdateConfigurationSetTrackingOptions operation.

Container for the necessary parameters to execute the UpdateConfigurationSetTrackingOptions operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for UpdateConfigurationSetTrackingOptions Operation

Updates an existing custom verification email template. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the UpdateCustomVerificationEmailTemplate service method. The response from the UpdateCustomVerificationEmailTemplate service method, as returned by SimpleEmailService. Indicates that custom verification email template provided content is invalid. Indicates that a custom verification email template with the name you specified does not exist. Indicates that the sender address specified for a custom verification email is not verified, and is therefore not eligible to send the custom verification email. REST API Reference for UpdateCustomVerificationEmailTemplate Operation

Initiates the asynchronous execution of the UpdateCustomVerificationEmailTemplate operation.

Container for the necessary parameters to execute the UpdateCustomVerificationEmailTemplate operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for UpdateCustomVerificationEmailTemplate Operation

Updates a receipt rule. For information about managing receipt rules, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the UpdateReceiptRule service method. The response from the UpdateReceiptRule service method, as returned by SimpleEmailService. Indicates that the provided AWS Lambda function is invalid, or that Amazon SES could not execute the provided function, possibly due to permissions issues. For information about giving permissions, see the Amazon SES Developer Guide. Indicates that the provided Amazon S3 bucket or AWS KMS encryption key is invalid, or that Amazon SES could not publish to the bucket, possibly due to permissions issues. For information about giving permissions, see the Amazon SES Developer Guide. Indicates that the provided Amazon SNS topic is invalid, or that Amazon SES could not publish to the topic, possibly due to permissions issues. For information about giving permissions, see the Amazon SES Developer Guide. Indicates that a resource could not be created because of service limits. For a list of Amazon SES limits, see the Amazon SES Developer Guide. Indicates that the provided receipt rule does not exist. Indicates that the provided receipt rule set does not exist. REST API Reference for UpdateReceiptRule Operation

Initiates the asynchronous execution of the UpdateReceiptRule operation.

Container for the necessary parameters to execute the UpdateReceiptRule operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for UpdateReceiptRule Operation

Updates an email template. Email templates enable you to send personalized email to one or more destinations in a single API operation. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the UpdateTemplate service method. The response from the UpdateTemplate service method, as returned by SimpleEmailService. Indicates that the template that you specified could not be rendered. This issue may occur when a template refers to a partial that does not exist. Indicates that the Template object you specified does not exist in your Amazon SES account. REST API Reference for UpdateTemplate Operation

Initiates the asynchronous execution of the UpdateTemplate operation.

Container for the necessary parameters to execute the UpdateTemplate operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for UpdateTemplate Operation

Returns a set of DKIM tokens for a domain. DKIM tokens are character strings that represent your domain's identity. Using these tokens, you will need to create DNS CNAME records that point to DKIM public keys hosted by Amazon SES. Amazon Web Services will eventually detect that you have updated your DNS records; this detection process may take up to 72 hours. Upon successful detection, Amazon SES will be able to DKIM-sign email originating from that domain. You can execute this operation no more than once per second. To enable or disable Easy DKIM signing for a domain, use the SetIdentityDkimEnabled operation. For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.

Container for the necessary parameters to execute the VerifyDomainDkim service method. The response from the VerifyDomainDkim service method, as returned by SimpleEmailService. REST API Reference for VerifyDomainDkim Operation

Initiates the asynchronous execution of the VerifyDomainDkim operation.

Container for the necessary parameters to execute the VerifyDomainDkim operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for VerifyDomainDkim Operation

Adds a domain to the list of identities for your Amazon SES account in the current AWS Region and attempts to verify it. For more information about verifying domains, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the VerifyDomainIdentity service method. The response from the VerifyDomainIdentity service method, as returned by SimpleEmailService. REST API Reference for VerifyDomainIdentity Operation

Initiates the asynchronous execution of the VerifyDomainIdentity operation.

Container for the necessary parameters to execute the VerifyDomainIdentity operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for VerifyDomainIdentity Operation

Deprecated. Use the VerifyEmailIdentity operation to verify a new email address.

Container for the necessary parameters to execute the VerifyEmailAddress service method. The response from the VerifyEmailAddress service method, as returned by SimpleEmailService. REST API Reference for VerifyEmailAddress Operation

Initiates the asynchronous execution of the VerifyEmailAddress operation.

Container for the necessary parameters to execute the VerifyEmailAddress operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for VerifyEmailAddress Operation

Adds an email address to the list of identities for your Amazon SES account in the current AWS region and attempts to verify it. As a result of executing this operation, a verification email is sent to the specified address. You can execute this operation no more than once per second.

Container for the necessary parameters to execute the VerifyEmailIdentity service method. The response from the VerifyEmailIdentity service method, as returned by SimpleEmailService. REST API Reference for VerifyEmailIdentity Operation

Initiates the asynchronous execution of the VerifyEmailIdentity operation.

Container for the necessary parameters to execute the VerifyEmailIdentity operation. A cancellation token that can be used by other objects or threads to receive notice of cancellation. The task object representing the asynchronous operation. REST API Reference for VerifyEmailIdentity Operation

Interface for accessing SimpleEmailService Amazon Simple Email Service This document contains reference information for the Amazon Simple Email Service (Amazon SES) API, version 2010-12-01. This document is best used in conjunction with the Amazon SES Developer Guide. For a list of Amazon SES endpoints to use in service requests, see Regions and Amazon SES in the Amazon SES Developer Guide.

Initiates the asynchronous execution of the CloneReceiptRuleSet operation.

Initiates the asynchronous execution of the CreateConfigurationSet operation.

Initiates the asynchronous execution of the CreateConfigurationSetEventDestination operation.

When the tracking domain you specified is not verified in Amazon SES.
When the tracking domain you specified is not a valid domain or subdomain.